LumberJocks

Grizzly G1023RL alignment issue

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Bke619 posted 02-09-2015 04:22 PM 650 views 0 times favorited 3 replies Add to Favorites Watch
View Bke619's profile

Bke619

1 post in 670 days


02-09-2015 04:22 PM

Topic tags/keywords: question tip alignment

Hey all, just joined for the first time after reading on here for some time now. After much research and deliberation I finally decided to order the Grizzly G1023RL (excitement ensued). Shipping was quick, got it in the garage and on the base easy enough, but when I started looking through the insert slot I noticed that the arbor and everything internal looked misaligned. I maxed out the adjustment on the table so I removed the table and adjusted the trunnions, which wre quickly maxed out. I believe that I have maxed out eh adjustability of the saw and I can’t even bring a blade up through the hole without hitting the front left plate tab. Please someone tell me that I’m missing something easy and I don’t have to send this thing back. It seems as though the whole mounted part needs to be pushed to the right but that isn’t even possible because the bevel adjustment is attached to the cabinet which prevents it from moving to the right. Any insight would be most appreciated!

Thank you


3 replies so far

View Fred Hargis's profile (online now)

Fred Hargis

3944 posts in 1958 days


#1 posted 02-09-2015 04:37 PM

I think my first call would be to Griz CS. I’ve had nothing but good results from them, and I’m sure if the saw needs replaced (unlikely, but you never know) they will be on top of things.

-- Our village hasn't lost it's idiot, he was elected to congress.

View Hans245's profile

Hans245

1 post in 667 days


#2 posted 02-09-2015 04:59 PM

I do not own one, but my first suggestion, yes it would be to call Griz. but if you can not resolve the problem, then my second suggestion would be to “remove the top”/reset your trunnion to center of adjustments/ place the top back on and align it to the blade/ tighten top, then try your alignment readings again, it is not guaranteed that the top is in the right location, when you got the saw.

View knotscott's profile (online now)

knotscott

7215 posts in 2840 days


#3 posted 02-09-2015 05:03 PM


I think my first call would be to Griz CS. I ve had nothing but good results from them, and I m sure if the saw needs replaced (unlikely, but you never know) they will be on top of things.

- Fred Hargis

Just to cover the basics, is the blade set at set at 90°? If so and it’s still not right, I’d call Griz before going further.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com