Rockwell/Delta 33-267 RAS Motor Wiring

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by cdhilburn posted 02-01-2015 04:57 PM 2094 views 0 times favorited 3 replies Add to Favorites Watch
View cdhilburn's profile


102 posts in 2680 days

02-01-2015 04:57 PM

Topic tags/keywords: ras radial arm saw rockwell delta rehab repair motor electrical

I picked up a sander yesterday off of CL and the man offered me a non-working RAS just to get it out of the way because he is moving. I brought it home and freed up all of the components and I think the problem is the wiring going into the motor. The wiring is dry rotted and the wires are exposed and I think shorted out at some point. He said he was cutting and it just quit so it makes sense. It doesn’t have a box on the motor but the wires go right in above where the cooling slots are. I tried to pull that end of the motor off but stopped when it wouldn’t come freely. I am going to have to get in there to replace the wiring but I wonder if it is a better job for a professional. I know wood and mechanical but not electrical. Does anyone have any idea on how to rewire this motor without me screwing it up. Thanks.

3 replies so far

View MrUnix's profile (online now)


6704 posts in 2194 days

#1 posted 02-01-2015 05:02 PM

According to the parts diagram, doesn’t look too difficult to get to:


-- Brad in FL - In Dog I trust... everything else is questionable

View cdhilburn's profile


102 posts in 2680 days

#2 posted 02-01-2015 05:40 PM

I saw that. But to be honest it doesn’t make much sense. At least to me!!! LOL!! I’ll try it again this afternoon. I’ll post a pic showing where I get stuck.

View cdhilburn's profile


102 posts in 2680 days

#3 posted 02-01-2015 10:34 PM

The brake was holding the motor on. Broke off the dry pieces of wire covering and put shrink wrap on them, New wire ends and it runs awesome.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics