LumberJocks

BRUTEBERNARD

  • Advertise with us

« back to LumberJocks.com Site Feedback forum

Forum topic by brutebernard posted 1924 days ago 470 views 0 times favorited 3 replies Add to Favorites Watch
View brutebernard's profile

brutebernard

1 post in 1926 days


1924 days ago

I’m re-finishing some elevator panels and I have stripped, sanded and applired three coats od Watco oil finish. I want to apply a finish coat of wax so that the panels can be touched up when they are scratched. How soon after the oil is applied can I put the wax on top?


3 replies so far

View Scott Bryan's profile

Scott Bryan

27251 posts in 2418 days


#1 posted 1924 days ago

I would wait at least 72 hours for the product to cure out but it may take longer depending upon the ambient temperature. The time line is a guide for applications that are made at room temperature (above 70 degrees F).

-- Challenges are what make life interesting; overcoming them is what makes life meaningful- Joshua Marine

View Gary's profile

Gary

6960 posts in 2029 days


#2 posted 1924 days ago

yup

-- Gary, DeKalb Texas only 4 miles from the mill

View Todd A. Clippinger's profile

Todd A. Clippinger

8711 posts in 2695 days


#3 posted 1924 days ago

I think Scott Bryan read my mind. I’m sayin’ exactly what he said.

-- Todd A. Clippinger, Montana, http://americancraftsmanworkshop.com

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase