LumberJocks

Restoring a 1950's Cass Toy Co Chest with Images, Help Please!

  • Advertise with us

« back to Finishing forum

Forum topic by JenTWG posted 01-24-2015 01:47 PM 1123 views 0 times favorited 11 replies Add to Favorites Watch
View JenTWG's profile

JenTWG

14 posts in 685 days


01-24-2015 01:47 PM

Topic tags/keywords: finish restoration question antique refinishing refinish chest cass toy

I have researched this to death and before I start this project I want to cover all my bases. I am restoring a 1950-60’s Cass Toy Co wooden toy chest. The chest I have is not in as good condition of the one pictured. The one I am restoring has lost about 50% of the finish, but all the original images are intact. It has some other issues for repair but the one I am concerned about it restoring the finish.
From the research I can find, these toy boxes were sometimes hand painted, some of them were a type of heat transferred image, some of them were more of a decal type and still others were sprayed on over stencils. Here is my question:

1) Is there a product or solution of some sort that I can safely use to remove the remaining finish without removing the images?

2) Would it be best to clean up the existing finish and repairs, then apply a new finish directly on top of what is left? I’m worried leaving any of the old finish will show the discoloration after a new finish is applied.

3) If it is not possible to do a restoration without loosing the graphics, which would be the best way to duplicate them to put them back on the chest? (I do not free hand paint)

-- Learning everyday


11 replies so far

View Tennessee's profile

Tennessee

2410 posts in 1980 days


#1 posted 01-24-2015 02:06 PM

Back in the 80’s when I did refinishing professionally, we lost a number of images to the refinishing process. But in this digital age, there is help, I believe.
I would take digital images of the patterns you want to keep. Take those images to a company that specializes in either vinyl cutouts, or possibly printing decals. Make sure you have measurements, (Height, width), so they can duplicate off the digital images the same size patterns. It might be pricey for just two-three images, but the other possibility is to hire a local artist who will hand paint them onto the unit after you strip it off. That is what we used to do when the painted image or decal became too difficult for us to reproduce ourselves, which was most of the time.

The other option is to try and just lightly sand the finish and add another coat. If you know what the current finish is, you can apply a compatible finish. Sometimes, a little patina underneath is a good thing.
From your picture, it doesn’t seem like there is too much discoloring, and as long as you think in terms of just repairing the top coat with another top coat, you might be surprised at how well you can restore the existing finish. Did it many times.

-- Paul, Tennessee, http://www.tsunamiguitars.com

View Gentile's profile

Gentile

262 posts in 1284 days


#2 posted 01-24-2015 05:21 PM

I would let it be.
Watching the Antique Roadshow, they always say the value of a piece of furniture is lessened due to refinishing…

-- "I cut it twice and it's still too short"

View JenTWG's profile

JenTWG

14 posts in 685 days


#3 posted 01-25-2015 02:57 AM

Thanks Tennessee, I was thinking of the digital images and trying Gimp or PS but a pro could probably do that a lot faster with detailed measurements and clear pictures. The value on this chest isn’t a great deal to deter fixing it as it is more sentimental and it’s my fathers and he’s asked me to fix it. The one I’ve posted pictures is in much better shape than his is. I don’t have photos of his chest yet, he’s bringing it to me this week. His chest is the same one shown, yet his finish is flaking badly and has some missing trim on the top lid. So restoration is my direction.

-- Learning everyday

View ElChe's profile

ElChe

630 posts in 802 days


#4 posted 01-25-2015 03:12 AM

What’s the finish? If it can be repaired that’s what I would vote for. Many old finishes can be repaired.

-- Tom - Measure twice cut once. Then measure again. Curse. Fudge.

View JenTWG's profile

JenTWG

14 posts in 685 days


#5 posted 02-28-2015 05:13 PM

I’m sorry it took me so long, but I finally finished. I had to completely strip and recreate the images on this chest. As I mentioned in my post, my actual trunk wasn’t near as good as the example photo. I didn’t have the trunk at the time I started researching the fix as it’s my dad’s toy chest from when he was little and he dropped it off over Christmas.

This is the actual chest and as you can see it’s in pretty bad shape. The top has a huge gouge on the top where someone had an accident with a saw, the finish is nearly gone and flaking everywhere and the images of the Pirate, Ship and Wheel are cracked and flaking off as well.

Thanks to Tennesee’s help I was able to take photos shot in RAW and remove the color/background to get rough b/w silhouettes of each image to work with. After hours of airbrushing/filling in color I was able to get all the images recreated to use Design Studio and cut stencils with Oramask for spraying back on.

-- Learning everyday

View JenTWG's profile

JenTWG

14 posts in 685 days


#6 posted 02-28-2015 05:19 PM

Here are a few pictures along the way of the steps I took and the finished chest. Thank you again Tennessee!

Still looking for some of the nail caps to replace the other trim piece for the top, but for now I moved them to the edges and removed the other center trim until I can find some more of the caps to match the others.

-- Learning everyday

View HerbC's profile

HerbC

1592 posts in 2325 days


#7 posted 03-01-2015 12:41 AM

Very nice job on the restore.

Herb

-- Herb, Florida - Here's why I close most messages with "Be Careful!" http://lumberjocks.com/HerbC/blog/17090

View JenTWG's profile

JenTWG

14 posts in 685 days


#8 posted 03-01-2015 03:44 AM

Thank you HerbC, now to just find 4 more of the nail head covers so I can put those other pieces of trim back on the top.

-- Learning everyday

View dhazelton's profile

dhazelton

2325 posts in 1762 days


#9 posted 03-01-2015 01:41 PM

Autozone sells little chromed buttons that come in different sizes. I don’t know if they are plastic or metal but you can paint them and silicone them on. Or go to an upholstery shop or sewing store and see what they have.

View Tennessee's profile

Tennessee

2410 posts in 1980 days


#10 posted 03-03-2015 07:41 PM

Wow!!
Outstanding job. You took a lot of time to redo those images, but I believe it was well worth it. And the paint of course is not anywhere as thick as vinyl would have been, and is probably more durable in the long run.

Just a great job!

-- Paul, Tennessee, http://www.tsunamiguitars.com

View JenTWG's profile

JenTWG

14 posts in 685 days


#11 posted 03-03-2015 08:25 PM

Thank you very much for not only your compliment but your help Tennessee, I really do appreciate it.

-- Learning everyday

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com