Ridgid R4512 Fence ad on

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Garbanzolasvegas posted 01-17-2015 01:04 AM 916 views 0 times favorited 2 replies Add to Favorites Watch
View Garbanzolasvegas's profile


356 posts in 1192 days

01-17-2015 01:04 AM

I am looking for a table saw fence add on I guess. My fence is fine and straight and all that but I would like to have an item I could ad to it where I could use the other pair of my Kreg Blue Feather boards to hold the stock from above flat against the table. Any suggestions?

Also I has seen the LEE CRAFT zero clearance insert for this saw and am going to get it and the dado insert as well BUT. I have another issue. Image that? issues with a R4512…..

With the stock insert, when I tilt the blade all the way over to do a 45 degree cut the blade Bites deep into the stock insert. This came as a huge surprise to me, not to mention sparks.

I have had to do 45 degree cuts with NO INSERT and I hate it.

Making ones own insert for this saw are problematic at best and impossible at worse. One would have to make a template and rout around where the leveling screws are. I am not prepared to do that as now

-- If you don't Play, you can't win

2 replies so far

View AlaskaGuy's profile


4045 posts in 2274 days

#1 posted 01-17-2015 11:24 AM

Do a Google search on” table saw fence jigs”. Lot of stuff out there in you look. As an example

-- Alaskan's for Global warming!

View Garbanzolasvegas's profile


356 posts in 1192 days

#2 posted 01-17-2015 02:32 PM


-- If you don't Play, you can't win

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics