Help me choose a plane to purchase

  • Advertise with us

« back to Hand Tools forum

Forum topic by Pat83 posted 01-16-2015 08:29 PM 996 views 1 time favorited 6 replies Add to Favorites Watch
View Pat83's profile


5 posts in 1276 days

01-16-2015 08:29 PM

I am a fairly new member to lumber jocks and I’d like to ask for help choosing a plane. I build furniture pieces using rough milled lumber such as ash, oak, black walnut and cedar. I have to smooth large surfaces and have been using a harbor freight #4 bench plane. It is a waste of time even after spending endless hours “tuning it up”. Nothing works nice about this plane and I want to choose a nicer plane for leveling my work. Please help!

-- Beginner I am.

6 replies so far

View sikrap's profile


1121 posts in 3386 days

#1 posted 01-16-2015 08:50 PM

There are several options available. I would suggest you start with a #5 jack plane. This could be used for rough work like dimensioning the wood and could then be adjusted to use as a smoother. The down side to this is that it will not excel as a smoother unless you’re willing to spend some time re-honing the iron before you start smoothing. IMHO, you should have one (or more) planes fro the dimension side and another (or more) for smoothing. If you’re working with large pieces, it might make more sense to have a 7 or 8 for flattening before you move to a smoother. There are several of us here that can sell you good planes at fair prices. Once you decide what you want, just post a WTB (want to buy) in the trade and swap section.

-- Dave, Colonie, NY

View Loren's profile


10476 posts in 3675 days

#2 posted 01-16-2015 09:13 PM

You can buy a Bailey #4 and a #5 on ebay for probably
about $50 for the pair. Several other badges are of comparable

Stanley has a new line of “Sweetheart” planes that hit a price
point somewhat lower than Lie Nielsen or Veritas premium
planes while still offering some premium features.

View Don W's profile

Don W

18754 posts in 2595 days

#3 posted 01-16-2015 09:23 PM

-- - Collecting is an investment in the past, and the future.

View knotscott's profile


8057 posts in 3403 days

#4 posted 01-16-2015 09:29 PM

I’m a fan of starting with a decent #5 and a block plane. A #4 is fine too. A #5 is the equivalent of a general purpose/combo saw blade…not as good at any particular thing as a more specialized size, but very versatile for most things. Bailey, Record, Millers Falls, Sargent VBM, Union, and Keen Kutter all have some nice examples. I try to steer clear of the econo versions of any of these, though they can all be made to work.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View Pat83's profile


5 posts in 1276 days

#5 posted 01-19-2015 02:15 AM

So I broke down and bought a Bosch hand planER! I’d does the majority of the work but a plane is most def still needed. Next weekend I’m going to visit my uncle who has my grandpas old tools. He was a carpenter by trade and I guess I’m able to claim what I want out of the collection. All his planes were wood bodied and well cared for. Thank you all for the help, I’m young and learning woodworking any way I can!!

-- Beginner I am.

View OSU55's profile


1702 posts in 2017 days

#6 posted 01-19-2015 06:10 AM

A Stanley Bailey #5 to clean up rough stuff. I like a 4-1/2 for smoothing, wider and heavier than a #4, and uses the same blade/breaker as the #7, which you’ll need for jointing boards and flattening glue ups. I have plane tuning info in my LJ’s blog, as well as my opinion on where to start with handplanes.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics