Jewlery box ring holder

  • Advertise with us

« back to Woodworking Skill Share forum

Forum topic by CanadaJeff posted 03-24-2009 12:08 AM 2771 views 0 times favorited 5 replies Add to Favorites Watch
View CanadaJeff's profile


207 posts in 3605 days

03-24-2009 12:08 AM

I was hoping some one can help me out with a simple project idea. Im building a jewlery box and was just on the site and saw this get idea for one of the boxes compartments. It’s a simple ring holder see –

This may seem like a dumb question because the idea seems pretty simple but does anyone have experience making one of these and if so could you tell me how you did it.

Is it just foam and nice fabric or is there something im missing?


5 replies so far

View Betsy's profile


3391 posts in 3892 days

#1 posted 03-24-2009 03:53 AM

Canada – you can buy ring holders. But the ones I’ve made have been made out of high quality foam surrounded by nice material of some sort. The trick is to size them all and get them tight enough to hold the ring and not so tight that they look crowded. It’s definitely easier to buy – but with just a little time and trial and error you can make your own. You can usually get some good foam at a hobby store.

-- "Our past judges our present." JFK - 1962; American Heritage Magazine

View TopamaxSurvivor's profile


18268 posts in 3671 days

#2 posted 03-24-2009 08:39 AM

There were some interiors for a reasonable price mentioned in one of the box projects posted in the last month. I thought I book marked the source, but I can’t seem to find it. Don’t know if it is worth your time to try to find that box project. Maybe some one else will remember where it was??

-- Bob in WW ~ "some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence

View CharlieM1958's profile


16274 posts in 4214 days

#3 posted 03-24-2009 03:07 PM

If you wanted to make it yourself, I would buy some foam, and cut rows of slits about 3/4” deep (but not all the way through). Then I’d sort of roll it out around something round like an aerosol can to open up the slits, spray the wole thing with some spray adhesive, then cover it with velvet, or whatever material you choose, tucking the fabric into the slits. Flatten it out, trim off the excess fabric, and you should have a ring holder.

Note: I have no idea if the procedure above will work…. it just seems like the way I would try to do it. :-)

-- Charlie M. "Woodworking - patience = firewood"

View SnowyRiver's profile


51457 posts in 3476 days

#4 posted 03-24-2009 03:31 PM

I have always bought them. You can find them at Rockler. They have them in a couple of different colors.
They come in various lengths and widths and you can just cut them to fit.

-- Wayne - Plymouth MN

View USCJeff's profile


1063 posts in 4064 days

#5 posted 03-30-2009 04:54 AM

Foam will work. I’ve seen rubber weather stripping for a vehicle door used as well. Also have seen cardboard, wan’t the best look. Yes, they’re fairly cheap at Rockelr and you can cut it to size.

-- Jeff, South Carolina

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics