LumberJocks

Jointer knives

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by ChrisCook posted 03-21-2009 05:46 PM 839 views 0 times favorited 7 replies Add to Favorites Watch
View ChrisCook's profile

ChrisCook

56 posts in 2334 days


03-21-2009 05:46 PM

I went and picked up a couple old craftsman joiners yesterday, and was wondering if anyone knew where I could get replacement knives for them. I have a craftsman 6” joiner/planer, and a 4” tabletop joiner. Thanks guys/gals!

-- Location: Birmingham, AL - Stimulate this Mr. President!


7 replies so far

View knotscott's profile

knotscott

5462 posts in 2031 days


#1 posted 03-21-2009 05:51 PM

Lots of places should have replacement blades…Infinity Tools, Grizzly, Amazon, Hartville Tool.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View ChrisCook's profile

ChrisCook

56 posts in 2334 days


#2 posted 03-21-2009 06:12 PM

Thanks scott, I didn’t know for sure. I haven’t ever owned a jointer. Still trying to figure out all the components of it. I found a manual for a model close to it, but not the exact one. Some of the general info in it is useful, but the setup stuff is a little different.

-- Location: Birmingham, AL - Stimulate this Mr. President!

View Phil53's profile

Phil53

90 posts in 2278 days


#3 posted 03-21-2009 06:44 PM

If you go to “http://www.searspartsdirect.com/partsdirect/index.action?sid=PSHx20080114×00001” you may be able to get them from Sears. Another good thing is sometimes they have the manuals in a pdf that you can download.

View gjd's profile

gjd

18326 posts in 2308 days


#4 posted 03-21-2009 07:46 PM

I have a 15 yr old 4” bench top joiner and I get my replacement blades at the Sears store.

-- gjd Southcentral Wisconsin

View marcb's profile

marcb

762 posts in 2329 days


#5 posted 03-21-2009 09:05 PM

holbren.com

Great service, great owner, great prices. tri-fecta.

View ChrisCook's profile

ChrisCook

56 posts in 2334 days


#6 posted 03-21-2009 09:32 PM

Thanks for the info guys! I have a 4” bench top also, I just have to repair the switch on it. Im not real happy with the 6” as of right now. Hopefully new knives will help. I think the biggest problem with it right now is that whoever put the knives in it didnt get them set up right. 2 of the 3 knives don’t even touch the wood, and I think the one that does is uneven.

-- Location: Birmingham, AL - Stimulate this Mr. President!

View marcb's profile

marcb

762 posts in 2329 days


#7 posted 03-21-2009 09:37 PM

Proper knife setting:
http://video.google.com/videoplay?docid=2983839096587014177&hl=en

Takes some time but gives the best finish possible The magnet jigs can’t push in when theres a tiny bit of bow which is not uncommon even with high end blades. A symptom of the hardening/tempering process.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase