LumberJocks

Where to purchase accessory for 36-979 Delta

  • Advertise with us

« back to Coffee Lounge forum

Forum topic by rexter posted 01-04-2015 04:42 PM 505 views 0 times favorited 1 reply Add to Favorites Watch
View rexter's profile

rexter

1 post in 705 days


01-04-2015 04:42 PM

Hi,

Where is the best place to purchase a Dado Insert for my Delta 36-979?
Thank you


1 reply so far

View Gerald Thompson's profile

Gerald Thompson

808 posts in 1700 days


#1 posted 01-05-2015 05:06 PM

I made my own. Trace your regular insert onto a piece of wood. I used red oak just because that is what I had.
Then cut it a little outside the line with a jig or band saw. Then using double sided tape stick the two together. I ran mine on the router table using a top bearing pattern bit. Be sure the metal insert is on top so the top bearing rides on it and it will make a perfect fit.
I then installed my dado stack and lowered it all the way down. Install the new insert. I uses two stiff boards clamped to either side of the insert. Start the saw and slowly raise the dado stack to full height.
I installed a little clip on the end that keeps it secure. I have used this same insert for over 20 years.

-- Jerry

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com