Floor Mounted Air Filter

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by ckorkyrun89 posted 01-02-2015 04:16 PM 706 views 0 times favorited 2 replies Add to Favorites Watch
View ckorkyrun89's profile


61 posts in 1862 days

01-02-2015 04:16 PM

Since I have a rather small shop, I try to make tool setups to incorporate more than one operation to save space. I am working on a table saw base that will include a router table and an air filter.

My question is does anyone see a problem with having a floor based air filter rather than one attached to the ceiling? I should be getting between 1500 and 2000 cfm through my filter and I will be using 20”x25” filters so I will have plenty of airflow.

I tend to think that dust particles are more or less evenly distributed vertically through a room so mounting the air filter near the floor will work just as well as on the ceiling.

Looking forward to hearing your thoughts.

2 replies so far

View Jim Finn's profile

Jim Finn

2577 posts in 2761 days

#1 posted 01-02-2015 09:54 PM

It should work fine at most any level but I would put it out of the way on the ceiling. That is where mine is and it never in the way, up there.

-- No PHD, but I have a GED and my DD 214

View cracknpop's profile


259 posts in 2188 days

#2 posted 01-03-2015 02:53 AM

I have been thinking of incorporating an air cleaner in a mobile assembly table, so I am interested in hearing other LJs answers to your question as well. Thanks for posting.

-- Rick - I know I am not perfect, but I will keep pressing on toward the goal of becoming all I am called to be.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics