LumberJocks

Box for Poker Tournament

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by wanderfoxx posted 12-31-2014 02:21 AM 675 views 0 times favorited 3 replies Add to Favorites Watch
View wanderfoxx's profile

wanderfoxx

15 posts in 713 days


12-31-2014 02:21 AM

Topic tags/keywords: box poker box

I posted this in the Coffee lounge, but, It was suggested I post here also, this is the final forum post on this request.

Hello,

I am posting here, per the advice of many of the LumberJocks who I have spoken with recently. Hopefully, this will not create cause for flagging.

Basically, I am looking for someone who may be interested in creating a box to hold a poker playing set, to be raffled off at a fund raiser for a 501 C3 non-profit organization that I am affiliated with. I guess this would be considered a commissioned piece, as I am unable to create this myself, at this time.

Our organization, C.E.B.A., a 501 C3 non-profit, is an employee organization, formed in the 1980’s by the employees of Caven; addressing necessary financial issues of employees who were unfortunate to have developed illnesses, not generally covered by medical insurance (Cancer, Leukemia, Autoimmune, etc., etc.). As it was successful, it later expanded to include legitimate “Acts of God” (think fire, flood, auto accidents, sudden illness, etc, etc.). No one in the organization (member or board officer) receives a paycheck for time given, or, services rendered, it is all voluntary.

One of the yearly fund raisers is a poker tournament. Last year our organization obtained a traditional carrying case for 300 chips, poker cards, and, related items. This was put in with other raffle prizes, for the attending supporters of the event, to have a chance to win. After recently finding this site, LumberJocks.com, I thought a personally designed wooden box to showcase this year’s poker set would be an even more desirable raffle gift, and therefore, create more interest in our fund raiser.

I believe my organization will offer up to $100 for this project, this year. If it is as successful as I suspect it will be, then it is possible, that in following years, any commissioned price offered for another box would be greater. The $100 would be for the design and box itself. The chips, cards, and related items will be obtained from by our non-profit. Also, I personally will pay for the packaging and shipping of the box, myself, to Dallas, TX (within the US, perhaps Canada/Mexico (depending)). I understand that for many craftsmen this may be too low a price for them to do this for us. But, I believe that the best way to find out who may have time, material, and interest is to simply ask, and, see who replies. I have been very fortunate, so far, to have received many messages of support, advice, and, a few initially interested craftsmen. If anyone finds this an interesting project, I would enjoy hearing from you, and, I will gladly answer any of your questions.

I would like to leave the design of the box up to the individual craftsman. Allowing them control of costs for materials, and, also allowing them to be creative in the manner that they feel comfortable. I have seen beautiful boxes of all types on this site, and, personally, in my lifetime. In the right hands even scrap lumber can be turned into a desired piece, whether it is a simple formed, or, a more creatively designed piece. Nice thing about wood is that it tends to illicit interest, naturally. Down below you should find a few measurements of interest, and, or notes.

1) Chips come grouped, 25 chips together. The Diameter for most of them is 1 and 5/8th inch across.

2) The length, for 25 grouped chips, is 3 and 3/8 inch long (but, I suggest you add at least another 1/8” to accommodate any possible collective variances in chip thickness that may affect the length of the chip groups.

3) The poker cards are sized at 2.5 “ wide X 3.5 “ tall. There will be two decks of cards in the poker set.

4) The weight of 25 chips ranges from 8.47 oz., up to, 13.76 oz. . We are wanting a box to hold from 300 to 500 chips. So the chips may weigh anywhere from 10 to 17 lbs. The box would need to be able to hold up to 18 lbs of weight solidly for a 500 chip set, or, 11lbs for a 300 chip set.

5) As this is a raffle prize going out to anyone, it would be desirable that the box not have any splintered wood pieces, or, sharp hardware that might catch and accidentally cut someone. This seems trite or unnecessary to request, but, I would rather note this upfront instead of addressing it later, after work has started on a piece.

6) Ideally the box would be designed to hold chips / chip groups, and, cards stationary in the box.

7.) The project will need to be finished by the end of March, 2015. The Tourny is scheduled for April.

Thank you,
Scot


3 replies so far

View Tim_CPWD 's profile

Tim_CPWD

306 posts in 706 days


#1 posted 12-31-2014 02:56 AM

Scot, I would be interested in helping you out. I just built this poker display case for a friend of mine for Christmas. Since I have all the design work done for the chip holder drawers (which is the hard part) I would be willing to do a scaled down/simplified display case that would look very nice and meet your needs. The chips you see in the photo are casino quality 14 gram clay chips.

Please PM me and we can discuss details.

-- Tim Haenisch, San Diego Ca. http://www.facebook.com/commandperformancewooddesigns

View Mike M's profile

Mike M

15 posts in 729 days


#2 posted 12-31-2014 04:03 PM

That’s a beautiful case Tim.

View Tim_CPWD 's profile

Tim_CPWD

306 posts in 706 days


#3 posted 01-01-2015 07:39 AM

Thanks Mike. It was a fun project.

-- Tim Haenisch, San Diego Ca. http://www.facebook.com/commandperformancewooddesigns

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com