Delta Sliding Table attachment

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by riverrat posted 02-25-2009 01:03 AM 6050 views 0 times favorited 1 reply Add to Favorites Watch
View riverrat's profile


19 posts in 3342 days

02-25-2009 01:03 AM

poor man's saw, New here and this is my first post.
I recentlly purchased a Delta Sliding Table attachment from Craigslist. Got it cheap, it’s well used and missing some parts. After fabricating some parts myself, I attached it to an old Craftsman 10” table saw, along with a new Delta fence. It’s like a new saw now, however, I’m having trouble keeping the sliding table in alignment. I’m wondering if anyone here has had this experience and can offer some advice? Also would like to know, from those of you who own a Delta Sliding Table, what the bottom rail is made from? It was missing from the parts I purchased, so I made one from 1” steel tubing. It seems a little weak and a causes a slight table motion as the bottom roller reaches the end of the tube. I’m attaching a couple of photos. Thanks in old new saw
my poor saw

-- Muffleman

1 reply so far

View Mark Shymanski's profile

Mark Shymanski

5621 posts in 3676 days

#1 posted 06-06-2009 07:00 AM

Interesting find. Have you been able to improve it’s performance any?

-- "Checking for square? What madness is this! The cabinet is square because I will it to be so!" Jeremy Greiner LJ Topic#20953 2011 Feb 2

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics