LumberJocks

Craftsman 103 table saw resale value

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Ajs73 posted 12-15-2014 07:30 PM 924 views 0 times favorited 7 replies Add to Favorites Watch
View Ajs73's profile

Ajs73

134 posts in 984 days


12-15-2014 07:30 PM

Hey all, looking for advice on selling my table saw.
(Craftsman King Seely 103.22160) on Craigslist in Ohio. Saw is in
great condition. Only selling for 1 is dust collection, & 2 is 8 1/4”
blade w/ 1/2” shaft. Backstory is this is my first belt driven saw. Bought on CL for $50 with fence & no wings. Few months
later found same saw w/ 4 3/8 joiner, wings, bigger stand,& 2 motors
for $25. (Stole that). Cleaned up joiner & put on smaller stand &
sold on CL for $50 so what in the pics is the saw I built out of the 2. Finished saw I have $25 in so want to sell at a fair price that
won’t take forever to sell. Have put no new paint on anything,
only cleaned with soap and water and still have complete other
saw to go with. (All gears in extra carriage are good, 1 knob
controls height & tilt ) Comes with everything in pics & is
pretty heavy. Not in a hurry cause I love the saw & cuts perfect & don’t
Have a replacement other than my Delta Sidekick but I’ve
been looking. Thanks for any advice,comments, & questions
are welcome. Also want to wish all Jocks a Merry Christmas.
( hope post is in correct place & pics work out, tough on my phone)

-- Andy, Alliance,Ohio


7 replies so far

View Tedstor's profile

Tedstor

1625 posts in 2099 days


#1 posted 12-15-2014 09:54 PM

I’d think $50 is about right if you want it to sell quickly.

View Ajs73's profile

Ajs73

134 posts in 984 days


#2 posted 12-15-2014 10:12 PM

Scrap prices are higher. I see ryobi benchtops higher than that
Must be a lot of junk collectors in VA. driving scrap rates down.

-- Andy, Alliance,Ohio

View Tedstor's profile

Tedstor

1625 posts in 2099 days


#3 posted 12-15-2014 10:30 PM

Good luck. Hopefully someone that doesn’t realize it takes small, shimmed blades will give you $100.

View Ajs73's profile

Ajs73

134 posts in 984 days


#4 posted 12-15-2014 10:46 PM

Thanks, I wouldn’t sell it to someone without
telling them all about it. I’ve got 20 spacers/bushings
to go with it. Only in it $25 + labor cleaning it up
and works for me, just
wanting better DC.

Merry Christmas

-- Andy, Alliance,Ohio

View a1Jim's profile

a1Jim

115206 posts in 3044 days


#5 posted 12-15-2014 11:10 PM

Wow that’s a nice one but unfortunately there are quite a few of them on my Craigslist in the $10-$75 range.

-- http://artisticwoodstudio.com Custom furniture

View Tedstor's profile

Tedstor

1625 posts in 2099 days


#6 posted 12-16-2014 01:30 AM

Thats pretty much what they sell for here too…..and I see a couple of them every month. I actually used to have one. Damn good saw, but the table is small and the 8” blade/bushing deal was kind of a hassle. I typically just used a 7.25” circular saw blade. I made a really nice, dead-accurate x-cut sled for mine. I almost kept it as a dedicated x-cut saw. But in the end, I sold it off for $50 bucks for a larger, newer craftsman 113.

View emart's profile

emart

422 posts in 2095 days


#7 posted 12-16-2014 01:48 AM

Out here one in that good of shape can run in the $110-150 range. They are very common so they aren’t worth very much. Scrap value is worth more here since the local steel mill devours all the available scrap steel

-- tools are only as good as the hands that hold them https://www.custommade.com/by/emeraldcrafts/

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com