LumberJocks

DW 708 SCMS Adjustment.

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Gerald Thompson posted 11-07-2014 12:06 PM 736 views 0 times favorited 2 replies Add to Favorites Watch
View Gerald Thompson's profile

Gerald Thompson

808 posts in 1696 days


11-07-2014 12:06 PM

I have managed so adjust the saw blade to 0 degrees and 45 degrees to the left but cannot get the blade to 45d to the right. The adjustment bolt is below the right adjustment bolt for the 0 degree scale. I have adjusted it and the degree pointer will only move about 10d maximum. If I kept turning it it seems as if the bolt would come out completely before 45 degrees was achieved.
By left and right adjustments I mean from the aspect of standing in front of the saw and the degree pointer would be left or right not the blade itself.

-- Jerry


2 replies so far

View duc996's profile

duc996

6 posts in 959 days


#1 posted 11-07-2014 01:43 PM

Jerry, are you trying to bevel 45 degrees to the right? I have the same model and if you are trying to do that then look towards the back of the machine. There is a black plastic arrow piece that you have to press for the unit to bevel to the right. I hope that is what you were asking.

View Gerald Thompson's profile

Gerald Thompson

808 posts in 1696 days


#2 posted 11-07-2014 02:47 PM

Ah so! Yes it works. I don’t care what they say about you, you are OK.
Thank you.

Jerry

-- Jerry

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com