• Advertise with us

« back to Woodturning forum

Forum topic by 3285jeff posted 10-14-2014 11:23 AM 1098 views 0 times favorited 3 replies Add to Favorites Watch
View 3285jeff's profile


152 posts in 1717 days

10-14-2014 11:23 AM

well I got my shopsmith out and started playing with it some today,,,i tried turning something on it but the spur center keep releasing it at times when I was turning,,,anything thing better at holding the wood than a spur center,,

3 replies so far

View Nubsnstubs's profile


1287 posts in 1729 days

#1 posted 10-14-2014 02:51 PM

Are you saying it was spinning???Jerry (in Tucson)

-- Jerry (in Tucson)

View SASmith               's profile


1850 posts in 2986 days

#2 posted 10-14-2014 08:44 PM

This is similar to what I made for my SS.

-- Scott Smith, Southern Illinois

View Bill7255's profile


427 posts in 2284 days

#3 posted 10-14-2014 09:48 PM

Been awhile since I turned on a shopsmith. Are you using a live center in the tail stock? A dead center will wear the workpiece resulting in it loosening during turning. You would need to re tighten the workpiece to compensate for the wear. The screw center above would be better regardless of which center you are using.

-- Bill R

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics