LumberJocks

Metal inlay for drop spindles

  • Advertise with us

« back to Woodturning forum

Forum topic by SpindleMaker posted 10-05-2014 03:45 PM 800 views 0 times favorited 3 replies Add to Favorites Watch
View SpindleMaker's profile

SpindleMaker

25 posts in 1176 days


10-05-2014 03:45 PM

Topic tags/keywords: inlay metal rings

I would like a little help. I am attempting to locate a source for chrome, brass, silver, etc. rings to be used as inlay on the outer edge of drop spindles. The spindles are turned disks measuring 2-3 inches in diameter and 3/8 to 1” thick. Any advice will be greatly appreciated. Thanks.

-- Every man is a damn fool for at least five minutes every day; wisdom consists in not exceeding the limit.


3 replies so far

View Arlin Eastman's profile

Arlin Eastman

3557 posts in 2028 days


#1 posted 10-05-2014 04:14 PM

Go to my post here

http://lumberjocks.com/topics/64417

I have a link to Grizzly and also the DVD which has tons of info and how to do it too.

-- Please help me help other Vets click..> http://www.gofundme.com/m1abko.....It is always the right time, to do the right thing.

View SpindleMaker's profile

SpindleMaker

25 posts in 1176 days


#2 posted 10-05-2014 05:52 PM

Thanks, Arlin. I saw your project and that is what triggered my question. The Grizzly info is great. Rick

-- Every man is a damn fool for at least five minutes every day; wisdom consists in not exceeding the limit.

View Arlin Eastman's profile

Arlin Eastman

3557 posts in 2028 days


#3 posted 10-05-2014 08:30 PM

You are welcome buddy

-- Please help me help other Vets click..> http://www.gofundme.com/m1abko.....It is always the right time, to do the right thing.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com