Grizzly's Bald Eagle Ultrasonic Cleaners

  • Advertise with us

« back to Coffee Lounge forum

Forum topic by kajunkraft posted 10-03-2014 01:19 AM 2359 views 0 times favorited 3 replies Add to Favorites Watch
View kajunkraft's profile


139 posts in 1634 days

10-03-2014 01:19 AM

Just read an e-mail from Grizzly promoting the new Bald Eagle Ultrasonic Cleaners.

Don’t have any idea what these are, so I clicked on it and saw the varieties available. Clicked on a couple of those to read the descriptions, hoping to learn why I should have one.

Still no clue!

Does anybody know what these are all about?

3 replies so far

View crank49's profile


3979 posts in 2394 days

#1 posted 10-03-2014 02:34 AM

Ultrasonic cleaners use ultra high frequency sound waves to clean what ever metalic or other very hard material is submerged in its tank.
The tank itself contains a special cleaning solution designed to work in this fashion.
The high frequency vibrations cause the little nooks and crannies of the item being cleaned to cavitate and this causes microscopic bubbles to burst off the surface carrying oil, dirt and greas with them.
I could not run my jewelty store without ultrasonic cleaners.
I must admit, I dont have a clue what I would want one in my wood shop for.
It would not clean paint brushes, unless the bristles were metal or glass.
Might clean the resin off a saw blade, but that would be a huge machine by ultrasonic standards; and super expensive. My jewelry cleaners have 3” x 4” x 8” tanks and cost about $400.

-- Michael: Hillary has a long list of accomplishments, though most DAs would refer to them as felonies.

View kajunkraft's profile


139 posts in 1634 days

#2 posted 10-03-2014 11:19 AM

Guess I should have been a little more specific. I am aware of the use of ultrasonic cleaners for jewelry. But, like you said, what possible use would there be for them in a woodworking situation? Had hoped that somewhere in the description of a particular model there would have been some discussion of the use.

Are you on the Grizzly e-mail list? And did you also receive the same information? Maybe they are for metal workers?

View 6mmBR's profile


28 posts in 759 days

#3 posted 10-28-2014 01:00 AM

Not a woodworking use, but gun people use them to clean brass for reloading. Also for cleaning small internal parts of rifles or handguns after shooting.

I’ve never tried it, but it’s supposed to work very well for brass. I still use the older method; tumblers filled with corn cob or walnut. It works too, but it’s dusty.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics