Boice Crane jointer need a fence

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Scott L posted 09-12-2014 03:06 PM 755 views 0 times favorited 3 replies Add to Favorites Watch
View Scott L's profile

Scott L

2 posts in 984 days

09-12-2014 03:06 PM

I have a 6 inch boice crane jointer with a direct drive peerless motor. I need a fence or information on how to build one. If someone has info or anything that has a diagram so I could get the measurements I would be very grateful for the help. Thanks

-- Scott, Louisiana

3 replies so far

View Loren's profile


8159 posts in 3067 days

#1 posted 09-12-2014 03:21 PM

You’re unlikely to find on that matches.

Above is listing for a jointer fence you should
be able to figure out how to mount, perhaps
by building a sort of box round one side of
your jointer to anchor the fence to.

View MrUnix's profile


4028 posts in 1618 days

#2 posted 09-12-2014 03:46 PM

You could make a temporary fence out of wood or MDF to get you by while you are looking for a replacement. Do you have any of the fence bits at all? If not, your best bet might be to keep an eye out for a parts machine.. or someone who is parting out one that is too far gone to restore completely. Maybe put a WTB ad over at the OWWM site. I don’t have any measurements, but here is a picture of the parts for a BC1400 (belt drive) that will give you an idea of what you might be missing (fence and associated parts are in the bottom portion of the photo):


-- Brad in FL - To be old and wise, you must first be young and stupid

View Scott L's profile

Scott L

2 posts in 984 days

#3 posted 09-12-2014 06:17 PM

I’m missing the whole fence and knobs. I have looked on vintage machine and owwm and found a lot of pics of it.I put add on there to but no luck yet. Thanks for info and pics but I would like to find the original fence. Hopefully somebody will come up with one

-- Scott, Louisiana

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics