LumberJocks

Nice score of router bits :)

  • Advertise with us

« back to Coffee Lounge forum

Forum topic by AngieO posted 09-06-2014 05:29 PM 3448 views 1 time favorited 34 replies Add to Favorites Watch
View AngieO's profile

AngieO

1245 posts in 1606 days


09-06-2014 05:29 PM

Topic tags/keywords: router bits score sanders

Ok… so I just posted a tool question. And while I’m at it I might as well share a little about my latest find.

Last week was my birthday. A friend of mine is cleaning out his garage trying to make room for his car before winter. He came across a box of router bits. He’s a contractor and while on a job the guy had a bunch of “stuff” that he said he wanted him to get rid of for him. It was an older guy. He grabbed quite a bit and the stuff got stored in his garage and it’s been there every since. As he was cleaning he found a box of router bits. He has never had a use for them and so he decided to gift them to me for my birthday. I figured it would be a box of used bits. NOT QUITE!!!

Here is what he brought over….

I couldn’t believe it. Almost every bit in the lot was brand new. And not junky… Whiteside, Freud, Woodcraft

And of course… this was the killer….

I’ve been wanting a set of these for a while. Now I need to get the raised panel bit.

And all these bits are 1/2” shank. Sooooo… of course all I have is a 1/4” router. But THIS is why I am looking for the 1/2’’ collet for my router. LOL. I can’t wait to play with these bits.

And… a couple days later he came back with three more bits. Both Whiteside. Both new. Both 1/2” shank. AND… a table top belt sander and a couple other things. A Milescraft tool to add to your dremel to make it be able to rout (not sure what it was called. And a Milescraft dual featherbooard attachment.

PLUS (as if there needed to be more).. I got a a 6”disc/belt sander. I don’t have a pic of it. But there was also this….

This is what it says on the side. I entered that number at ereplacementpats and couldn’t find anything.

There’s no motor. I was looking for the motor and can’t find anything. Everything is new and in box… except the manual. LOL

Pretty nice birthday score… :)


34 replies so far

View AngieO's profile

AngieO

1245 posts in 1606 days


#1 posted 09-06-2014 05:33 PM

Oh… and the box sets.. there are two in the pic. There was a third. They are Woodcraft. There was a duplicate set of the one on the right. In about an hour or so I’m going to a friends house. Hoping to make a trade with him for some bits he doesn’t use.

View WayneC's profile

WayneC

12642 posts in 3557 days


#2 posted 09-06-2014 05:42 PM

What kind of router do you have?

-- We must guard our enthusiasm as we would our life - James Krenov

View JoeinGa's profile

JoeinGa

7472 posts in 1466 days


#3 posted 09-06-2014 05:48 PM

Well Happy Birthday to you Angie!
Nice score on the “stuff” !

Oh yeah.. and YOU SUCK!

-- Perform A Random Act Of Kindness Today ... Pay It Forward

View crank49's profile

crank49

3980 posts in 2430 days


#4 posted 09-06-2014 06:03 PM

Happy birthday Angie.

Not sure if you can adapt a 1/4” pouter to 1/2”. Probably not. The 1/2” routers have an oversize shaft to allow the hole for the bit to recess into.

It’s not too hard to go the other way, 1/2” down to a 1/4” with a collet that is 1/4” ID and an OD of 1/2”

-- Michael: Hillary has a long list of accomplishments, though most DAs would refer to them as felonies.

View Gary's profile

Gary

8968 posts in 2892 days


#5 posted 09-06-2014 06:28 PM

wow…. just….wow

-- Gary, DeKalb Texas only 4 miles from the mill

View crank49's profile

crank49

3980 posts in 2430 days


#6 posted 09-06-2014 06:33 PM



Happy birthday Angie.

Not sure if you can adapt a 1/4” pouter to 1/2”. Probably not. The 1/2” routers have an oversize shaft to allow the hole for the bit to recess into.

It s not too hard to go the other way, 1/2” down to a 1/4” with a collet that is 1/4” ID and an OD of 1/2”

- crank49

Oops, I just went over and read your other post and see that you have a router made for 1/4” and 1/2” bits.

-- Michael: Hillary has a long list of accomplishments, though most DAs would refer to them as felonies.

View tyvekboy's profile (online now)

tyvekboy

1334 posts in 2472 days


#7 posted 09-06-2014 06:39 PM

I would take the collet off your router and check to see if it will take a 1/2 inch shank router bit. Like crank49 said, it may not be able to take a 1/2 inch shank.

Tell your Mom that for your birthday you want a 3.25 HP Porter Cable router and a router table with a lift. If you plan on using that rail and style bit set, youʻll need a router table. This Porter Cable router is what I have in my router table and I have both 1/4 and 1/2 inch collets. Also Porter Cable collets are a lot easier to find.

Hope that helps.

Happy Birthday.

-- Tyvekboy -- Marietta, GA ………….. one can never be too organized

View AnonymousRequest's profile

AnonymousRequest

861 posts in 1008 days


#8 posted 09-06-2014 06:53 PM

Real nice score and Happy Birthday.

View Handtooler's profile

Handtooler

1373 posts in 1591 days


#9 posted 09-06-2014 07:47 PM

And, a very HAPPY BIRTHDAY to you! Just a super friend to do such charitable house (garage) cleaning. That’s great :Stuff”.

-- Russell Pitner Hixson, TN 37343 bassboy40@outlook.com

View DocSavage45's profile

DocSavage45

7694 posts in 2302 days


#10 posted 09-06-2014 08:15 PM

I think JoeinGA said it all! But it is tradition for someone getting a real score. Those are quality bits!

Oh yeah keep your shoes on. LOL!

-- Cau Haus Designs, Thomas J. Tieffenbacher

View Grumpymike's profile

Grumpymike

1914 posts in 1774 days


#11 posted 09-06-2014 08:29 PM

Happy Birthday Angie,
Congrats on your score, I wish I had friends like that.

On your C’man Router; As you are aware, Sears has never made a router, they buy a line from other manufacturers and put their Craftsman label on them. Over the years many folks have made routers that bear the craftsman name, Ryobi, Porter Cable etc. etc.

One thing that most of us do not like is that they made the collet part of the shaft and not an interchangeable part.
now, in later years they have revised that stance and even started to carry the brand name Routers as well as other power tools in their line.

So with that being stated, it could be that you are having a hard time finding the collet parts because they were not an interchangeable or a replaceable part.

I have five Routers in my shop, All of different brand names, I use four of them the most, and yep you guessed it, the one gathering the dust is the C’man that I’ve had since the 80’s.

-- Grumpy old guy, and lookin' good Doin' it. ... Surprise Az.

View hoss12992's profile

hoss12992

3831 posts in 1352 days


#12 posted 09-06-2014 11:47 PM

Wow, what a score! Congrats

-- The Old Rednek Workshop https://www.facebook.com/theoldrednekworkshoptn

View revieck's profile

revieck

260 posts in 2529 days


#13 posted 09-07-2014 01:03 AM

Happy Birthday Angie! What a haul!!

-- Don't be at the airport when your ship comes in!

View SuperCubber's profile

SuperCubber

862 posts in 1744 days


#14 posted 09-07-2014 01:36 AM

That’s one heck of a birthday present! Happy birthday!

-- Joe | Spartanburg, SC | "To give anything less than your best is to sacrafice the gift." - Steve Prefontaine

View AngieO's profile

AngieO

1245 posts in 1606 days


#15 posted 09-07-2014 03:05 AM

I really do want to get the Porter Cable. Thats what we use at work and I like it.

The manual for my router says it will accept 1/4” or 1/2”. I posted a separate forum topic and was able to find the part. There appeared to be two pieces. It appears to be a nut and a chuck. Under $5 for each.

This is what my collet looks like.

It comes off and you can replace it with a 1/2”.

Eventually I will get the Porter Cable router. I would prefer to have one dedicated instead of having to change it out. Until then… this will work just fine.

I have the junky Craftsman router table. Sorry if you have one and like it… I’m just not happy with it. It’s nice to have a table.. but I hate to do anything that I need great detail on because it doesn’t do that good.

Thanks for the birthday wishes.

And… (knock on wood)... no mishaps lately. :)

showing 1 through 15 of 34 replies

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com