Price Alert - Forrest Woodworking II Blade - by davidroberts @ LumberJocks.com ~ woodworking community

« back to Power Tools, Hardware and Accessories forum

952 posts in 1655 days

1570 days ago

Topic tags/keywords: blade

I visited the WoodWhisperer site a few minutes ago and Marc has a price alert for a Forrest WW’ing II blade at Amazon.com. This may be old news for some of you, but if you are looking for probably the best blade on the market at a hugh discount, go check it out. This kind of buying is how you make a good woodshop great, on a budget. I think this blade normally goes for around $130 to 150 or so. It’s the only blade I use on my TS besides the Forrest King dado set. I gave a link to Marc’s site. Look in the top left corner of the page. Thanks Marc. It’s easier than pasting the link to the Amazon site.

http://thewoodwhisperer.com/

-- david roberts, spinning Tales from Topographic Oceans, no, really.

4 replies so far

Scott Bryan home \| projects \| blog 27262 posts in 1991 days #1 posted 1570 days ago	This is a bargain price for the blade. The 30 tooth one runs $96+ and the 40 tooth blade costs $114+ if purchased from Forrest. Amazon is selling the 40 tooth 0.125” kerf blade for this price and it includes free shipping. This price is nearly 40% off by the time you include shipping. That is cause for issuing a price alert. -- Challenges are what make life interesting; overcoming them is what makes life meaningful- Joshua Marine
CedarFreakCarl home \| projects \| blog 595 posts in 2222 days #2 posted 1570 days ago	I ordered a 40 tooth WWII from Amazon the other day. $83.11 w/free shipping. I didn’t really need a blade, but I couldn’t pass that deal up. -- Carl Rast, Pelion, SC
dlux home \| projects \| blog 54 posts in 1602 days #3 posted 1569 days ago	Just ordered mine $78, thanks for the tip!
woody57 home \| projects \| blog 639 posts in 1596 days #4 posted 1569 days ago	Thanks, I just ordered one for $78. I didn’t really need it right now, but I will eventually. -- Emmett, from Georgia

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	8792
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	222
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	28
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	61
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	79
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	1532
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	3548
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	15776
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	2034
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	495
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	2840
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	808
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	901
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	766
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	2740
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	1547
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	6158

	Author	Latest activity		New comments or replies since you last checked
DenverPierce's Profile	DenverPierce	53 seconds ago		sign in to get readership tracking
Sketchup - Too Good To Be True	jack4002	6 minutes ago	by RonInOhio	sign in to get readership tracking
My misadventures trying to buy a flat router table....	noone	8 minutes ago	by Rick M.	sign in to get readership tracking
Table Saw Battle	JarodMorris	13 minutes ago	by Rick M.	sign in to get readership tracking
andgraves's Profile	andgraves	15 minutes ago		sign in to get readership tracking
What type of wooder filler can i use to cover screw heads in pine that won't blotch when varathaned?	Jim Reeves	22 minutes ago	by a1Jim	sign in to get readership tracking
My Journey As A Scroll Saw Pattern Designer #1039: Progress	Sheila Landry (scrol	23 minutes ago	by Jay Wells	sign in to get readership tracking
Boxguy Embraces Diversity	Boxguy	23 minutes ago	by lightweightladylefty	sign in to get readership tracking
LET ME KNOW WHAT YOU THINK!!	indplswoodworking	26 minutes ago	by Moron	sign in to get readership tracking
i need to run a 220 volt outlet for a table saw, how do i put in the outlet?	michaelsgarage	31 minutes ago	by oldnovice	sign in to get readership tracking

Price Alert - Forrest Woodworking II Blade

4 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...