Sawstop extension wing support

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by john1102 posted 08-14-2014 11:44 PM 1451 views 0 times favorited 1 reply Add to Favorites Watch
View john1102's profile


58 posts in 2665 days

08-14-2014 11:44 PM

Topic tags/keywords: sawstop table saw extension wing extension support mobile base workshop

I am posting this question to see if anyone has any experience with this or insight. I am looking at the sawstop 3HP proffesional sawstop with 36 inch fence. However I have a small shop and like to move the saw around I don’t want to mess with an adjustable leg extension support on the saw table extension side.

I am planning on making my own additional extension wing since the ones included with saws aren’t usually as durable as I would like and I make mobile bases out of angle iron with total locking casters for easy mobility.

Will the saw be tipsy without an extension support (36 inch fence) and do you think the extension wing will sag or not without the additional support?

Thanks for any responses,
John P

1 reply so far

View boatz's profile


92 posts in 1648 days

#1 posted 08-15-2014 01:39 AM

I have had mine about six months- Sawstop 3hp PCS with 36” wing. My “shop” is in a one car garage bay that I also keep my 40 year old BMW. When I am woodworking I have to take the car out and move the saw to the middle. The support legs to the wing just barely touch the floor and at some points when I am moving the saw, not at all. So far I have had no issues with the wing sagging.

-- You can't always get what you want. But if you try sometimes you just might find, you'll get what you need

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics