Spindel measurements question.

  • Advertise with us

« back to Woodturning forum

Forum topic by Biggamefish posted 07-22-2014 01:53 PM 1005 views 0 times favorited 3 replies Add to Favorites Watch
View Biggamefish's profile


58 posts in 1414 days

07-22-2014 01:53 PM

I have a powermatic lathe that takes a morse taper #2. I want to get a collet and stright expanding mandrel to turn with. My problem is I don’t have the manual of the lathe to get the size and tp of the spindal. I was wondering if anybody could steer me into the right direction with the correct collet that i need.

-- ><((((º>`·. .· `·. .· `·... ><((((º> · `·. . . . .· `·.. ><((((º>`·. .· `·... ><((((º> 

3 replies so far

View DIYaholic's profile


19620 posts in 2670 days

#1 posted 07-22-2014 09:34 PM

I can’t really help….
Except to bump the thread….
That and ask if you have done an online search for the manual.
If you give the model number, someone may be able to help.

Good luck….

-- Randy-- I may not be good...but I am slow! If good things come to those who wait.... Why is procrastination a bad thing?

View Wildwood's profile


2305 posts in 2129 days

#2 posted 07-22-2014 09:55 PM


Might check out these turning vendors and Beall Collet Chucks

-- Bill

View Biggamefish's profile


58 posts in 1414 days

#3 posted 07-23-2014 01:10 AM

Thanks guys after some research and a few phone calls i found that is is an 1 1/2” 8 tpi.

-- ><((((º>`·. .· `·. .· `·... ><((((º> · `·. . . . .· `·.. ><((((º>`·. .· `·... ><((((º> 

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics