Drill press dust collection

  • Advertise with us

« back to Focus on the Workspace forum

Forum topic by ynathans posted 07-14-2014 09:48 PM 1389 views 0 times favorited 4 replies Add to Favorites Watch
View ynathans's profile


55 posts in 1743 days

07-14-2014 09:48 PM

Hey folks,

I just took delivery of this 17” Grizzly drill press: “”]":"] and wondering what you guys do for dust collection on the drill press?

I have a 2 HP DC with 4” runs and am also going to install the woodpecker drill press table: and will also use the woodpecker fence on it on occasion too so I’m wondering if the fence will interfere with any solution that involves clipping a host to the table or the support pole of the press?

I came across this solution,42401&ap=1 anyone familiar with it?



4 replies so far

View ynathans's profile


55 posts in 1743 days

#1 posted 07-14-2014 09:52 PM

Actually, I realize now that the lee valley link I referenced uses magnets and the woodpecker table is not metal, so that wouldn’t work…

View hairy's profile


2720 posts in 3558 days

#2 posted 07-16-2014 07:30 PM

I’m using this on the drill press.

You will also need a coupling and a clamp. I made a bracket out of plywood and bolted it down.

-- My reality check bounced...

View English's profile


658 posts in 1503 days

#3 posted 07-17-2014 01:03 AM

I use a section of 6” flex duct and clamp it where needed depending on what I am drilling .

-- John, Suffolk Virgina

View NiteWalker's profile


2737 posts in 2603 days

#4 posted 07-17-2014 05:20 AM

I use a broom and a dustpan…

-- He who dies with the most tools... dies with the emptiest wallet.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics