LumberJocks

dewalt 735

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by scribble posted 07-12-2014 05:20 AM 774 views 0 times favorited 7 replies Add to Favorites Watch
View scribble's profile

scribble

75 posts in 1066 days


07-12-2014 05:20 AM

Topic tags/keywords: question e planer

Does anyone know the size specs for the dewalt 735. Waiting on mine an would like to build a flip stand.

-- If you can't read it Scribble wrote it!! “Experience is merely the name men gave to their mistakes.”


7 replies so far

View Lumberpunk's profile

Lumberpunk

271 posts in 1202 days


#1 posted 07-12-2014 05:43 AM

It’s your lucky night.

Mine is 19 11/16th’s from the start of the infeed to the end of the outfeed
27 1/4” wide from the motor housing to the end of the handle. (Approximate)
14” from the base to the top of the posts and then full raised add about 6” (if you want to be able to flip your stand after planing 6 inch thick beams)

Enjoy!

-- If someone tells you you have enough tools and don't need any more, stop talking to them, you don't need that kind of negativity in your life.

View pintodeluxe's profile

pintodeluxe

3807 posts in 1679 days


#2 posted 07-12-2014 06:07 AM

I wouldn’t recommend a flip stand for that planer. It weighs 92 lbs.
Plus alignment is more difficult with a flip stand. The infeed / outfeed tables need to be just right to get top performance from your planer.

You will love the tool.

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

View Redoak49's profile

Redoak49

710 posts in 854 days


#3 posted 07-12-2014 12:54 PM

I agree that a flip stand would not be too good of an idea. The 735 is HEAVY and unless you are extremely careful, could be a problem both with the strength of the flip mechanism and the potential of being unbalanced.

If you do build one, I would build it very heavy duty and with a heavy counter weight. Most of the ones that I have seen posted would be marginal for this use.

Congratulations on picking a good planer…..

View NiteWalker's profile

NiteWalker

2710 posts in 1442 days


#4 posted 07-12-2014 08:18 PM

I disagree about a flip top stand for the 735. Many have done it. There’s a really nice one by Lance on youtube.

-- He who dies with the most tools... dies with the emptiest wallet.

View WhyMe's profile

WhyMe

236 posts in 426 days


#5 posted 07-13-2014 12:22 AM

Here’s the Lance flip top stand video …. http://www.youtube.com/watch?v=g51OuJjcj84

View Jim Finn's profile

Jim Finn

1862 posts in 1787 days


#6 posted 07-13-2014 12:44 PM

I would be reluctant to make a flip stand for my DeWalt planer and would not put it on wheels for sure. I would not like to have my planer start rolling away as I was running a long board though it. In my view, this planer is way to heavy to flip and the in-feed and out-feed tables are not shown in this video and are needed to eliminate snipe.

-- In God We Trust

View distrbd's profile

distrbd

1478 posts in 1312 days


#7 posted 07-13-2014 03:06 PM

I agree with Jim Finn as far as it being too heavy for a flip stand .

Also most likely people would buy the infeed-outfeed tables with it which means everytime you want to flip the planer ,you must first raise it up high so the tables can be folded,then they must be secured with a bungee cord or something so the don’t unfold during flipping motion.not a practical stand in my opinion.

-- Ken from Ontario

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com