LumberJocks

14-12 and Fusion arrived

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Nates02gt posted 23 days ago 462 views 0 times favorited 8 replies Add to Favorites Watch
View Nates02gt's profile

Nates02gt

59 posts in 619 days


23 days ago

Topic tags/keywords: laguna fusion 14-12 table saw band saw

I took delivery of my new Laguna band saw and table saw yesterday. I guess technically, my wife did, since the truck showed up 3 hours early. I spent about 5-6 hours setting everything up. Everything came very well packaged. The fit and finish is great on both pieces. The only issue I ran into was some spot rust on the fence guide bar on the band saw. I called Laguna and they are sending a replacement. I will work on writing up a review on both and post some pictures over the weekend. The difference between these and the tools they replaced is night and day. No more table vibration and much more accurate!

-Nate


8 replies so far

View Bill White's profile

Bill White

3356 posts in 2566 days


#1 posted 23 days ago

OK!
Bill

-- bill@magraphics.us

View kdc68's profile

kdc68

1942 posts in 882 days


#2 posted 23 days ago

Congrats !

-- Measure "at least" twice and cut once

View retfr8flyr's profile

retfr8flyr

180 posts in 275 days


#3 posted 23 days ago

Congrats!!! Which models did you get?

-- Earl

View Nates02gt's profile

Nates02gt

59 posts in 619 days


#4 posted 23 days ago

I got the Fusion TS and 14-Twelve BS.

View Nates02gt's profile

Nates02gt

59 posts in 619 days


#5 posted 23 days ago

Pardon the mess, I was in the middle of rearranging everything. =)

View retfr8flyr's profile

retfr8flyr

180 posts in 275 days


#6 posted 23 days ago

Nice!!

-- Earl

View violaine's profile

violaine

34 posts in 1428 days


#7 posted 22 days ago

Cheers!

View Nates02gt's profile

Nates02gt

59 posts in 619 days


#8 posted 19 days ago

Well, one minor complaint with the 14-12 bandsaw so far. The dust collection chute seems to be just a tad too wide. I am able to wrestle a 4” hose on there but it takes a bit of effort. I thought it may be the hose since it was the hose that came with my HF DC. I order a male/female 4” pvc sleeve to see if that would help but the sleeve would not fit on the port, even with grinding/sanding out the inside to make the opening bigger. I resorted to using a splicing sleeve with a small section of pipe to permanently attach it to the dust chute. That allows me to connect the hose to the splicing sleeve, which is much easier. Not a big deal but a little irritating.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase