Need advice on adding upper rail support for blind corner base cabinet.

« back to Designing Woodworking Projects forum

272 posts in 1617 days

1605 days ago

I’m about done with the carcass, but need to add an upper rail suppport. I want to dado these rails over 3/4”
plywood stock. Can anyone offer me the best way to accomplish this? I was thinking of dadoing a 4” or 5” wide piece of plywood stock along the edge of the door area, and then add one at 90 degrees.
Paul

-- Paul, Bristol,Rhode Island

1 reply so far

mics_54

home | projects | blog

581 posts in 1668 days

#1 posted 1599 days ago

Are you refering to your face front rails?

-- Dan, Sterling Alaska, Before you criticise some one, walk a mile in their shoes...then you will be a mile away and you have their shoes!

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	8848
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	246
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	32
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	69
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	96
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	1600
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	3595
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	15984
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	2102
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	501
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	2909
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	813
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	925
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	778
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	2778
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	1553
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	6134

LumberJocks Pulse

Latest activity	New comments or replies since you last checked
Rivotril Rezeptfrei, Rivotril Bestellen's Profile	Rivotril Rezeptfrei,	6 seconds ago	by HorizontalMike	sign in to get readership tracking
Where To Buy Zolpidem Cr No Prescription's Profile	Where To Buy Zolpide	22 seconds ago	by HorizontalMike	sign in to get readership tracking
mummykicks's Profile	mummykicks	37 seconds ago	by HorizontalMike	sign in to get readership tracking
Lost soul came home?	bandit571	39 seconds ago	by bandit571	sign in to get readership tracking
Lawn mower blade as tool steel?	jtriggs	42 seconds ago	by Tim Scoville	sign in to get readership tracking
dougpke's Profile	dougpke	47 seconds ago	by HorizontalMike	sign in to get readership tracking
fn2bhad's Profile	fn2bhad	58 seconds ago	by HorizontalMike	sign in to get readership tracking
jetskiman's Profile	jetskiman	1 minute ago	by HorizontalMike	sign in to get readership tracking
jongiard's Profile	jongiard	1 minute ago		sign in to get readership tracking
mikejf's Profile	mikejf	1 minute ago	by HorizontalMike	sign in to get readership tracking

Author

Latest activity

New comments or replies
since you last checked

Rivotril Rezeptfrei, Rivotril Bestellen's Profile

Rivotril Rezeptfrei,

6 seconds ago

by HorizontalMike

to get readership tracking

Where To Buy Zolpidem Cr No Prescription's Profile

Where To Buy Zolpide

22 seconds ago

by HorizontalMike

to get readership tracking

mummykicks's Profile

mummykicks

37 seconds ago

by HorizontalMike

to get readership tracking

Lost soul came home?

bandit571

39 seconds ago

by bandit571

to get readership tracking

Lawn mower blade as tool steel?

jtriggs

42 seconds ago

by Tim Scoville

to get readership tracking

dougpke's Profile

dougpke

47 seconds ago

by HorizontalMike

to get readership tracking

fn2bhad's Profile

fn2bhad

58 seconds ago

by HorizontalMike

to get readership tracking

jetskiman's Profile

jetskiman

1 minute ago

by HorizontalMike

to get readership tracking

jongiard's Profile

jongiard

1 minute ago

to get readership tracking

mikejf's Profile

mikejf

1 minute ago

by HorizontalMike

to get readership tracking

Need advice on adding upper rail support for blind corner base cabinet.

1 reply so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...