Jet 10-20 Drum Sander Conveyor Belt Alternative

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Shopguy posted 06-02-2014 08:42 PM 1925 views 0 times favorited 1 reply Add to Favorites Watch
View Shopguy's profile


13 posts in 2095 days

06-02-2014 08:42 PM

I have searched for suppliers of rubber conveyor belts to replace the sandpaper belt on a Jet 10-20 sander and found one reference to Hamilton Tool Supply. I contacted them and they have nothing.

Has anyone found a source for an alternative conveyor belt to replace the sanding belt conveyor that comes standard on the Jet drum sanders?

i am at my wits end trying to make the conveyor belt track properly on my 10-20. This appears to be an all too common problem on all the Jet drum sanders. Anyone with “The magic Solution”?


Roger in Texas

1 reply so far

View gfadvm's profile


14940 posts in 2684 days

#1 posted 06-03-2014 01:18 AM

Roger, I have that sander and the same tracking problems you have. I don’t think the rubber conveyer belt will help at all. I cut those stupid little “wrench adjustors” off and keep a T handled Allen wrench handy to adjust tracking every few minutes. Not a cure but a lot quicker/easier to adjust then using those “wrench thingys”. Jet tech support was no help in fixing this problem.

-- " I'll try to be nicer, if you'll try to be smarter" gfadvm

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics