Cutting thick slabs

  • Advertise with us

« back to Woodworking Skill Share forum

Forum topic by MancaveMan posted 05-24-2014 12:13 AM 1016 views 0 times favorited 3 replies Add to Favorites Watch
View MancaveMan's profile


1 post in 886 days

05-24-2014 12:13 AM

Topic tags/keywords: question

I have access to some 5.5”square x 12.5’ long 100+ yr old old growth southern yellow pine flooring from an old factory floor( these slabs are tounge & grooved) which I want to use to build a Roubo style bench. I will need to cut these behemoths down (length & width) and am unsure of the best way to do it. I have never cut anything so thick. I am concerned that my cabinet saw is a bit under powered at 1.75HP with only a 3 1/8” max depth of cut and these boards are far to unwieldy for my 14” bandsaw. My thought was to cut it half through on the table saw and then turn it over and cut up from the other side. I can later plane away any unevenness, I would love some suggestions on how to make use of these boards with my equipment.

3 replies so far

View derosa's profile


1568 posts in 2257 days

#1 posted 05-24-2014 12:49 AM

If you need them shorter I would use a skill or sawzall to cut it to length first at which point I have ripped one side and flipped it to do the other. Just have a sharp, lower tooth count blade that can clear the dust well. Move slow, especially towards the end as you can’t see the blade coming out of the end till its ready to get your fingers. You want out feed support.

-- --Rev. Russ in NY-- A posse ad esse

View AandCstyle's profile


2540 posts in 1679 days

#2 posted 05-24-2014 12:56 AM

1. Buy a thin kerf blade for your TS.
2. Hire a local sawyer with a Woodmizer.
3. Make an infeed/outfeed table for your BS and buy the proper blade.
4. Use your chain saw with a chain sharpened for ripping and an Alaskan saw mill.
5. Split them with wedges and a mall.
6. Punt.

-- Art

View ColonelTravis's profile


1159 posts in 1316 days

#3 posted 05-24-2014 01:18 AM

I’d use a circular saw to get them down to reasonable size for a TS. I had a P-C contractor saw that struggled just with SYP 2×10s and binding. Didn’t feel safe whatsoever having those large boards on there, ripped them all on the circular saw.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics