LumberJocks

Choosing finish for Cherry woodwork?

  • Advertise with us

« back to Finishing forum

Forum topic by Ben posted 05-21-2014 12:01 AM 733 views 1 time favorited 8 replies Add to Favorites Watch
View Ben's profile

Ben

204 posts in 1606 days


05-21-2014 12:01 AM

I’ll soon be completing a custom Cherry staircase with turned newels and balusters, with a custom Cherry hand rail.

I’m wondering what some of you would use for a finish on this stuff? Thinking a nice natural oil finish with maybe a poly top-coat?

I’m also doing all the door and window trim in Cherry. So ideally something not too elaborate or time consuming.

Waterlox is out because it doesn’t apply well on vertical surfaces (learned this the hard way on my cabinets).

Suggestions please?

Thanks!


8 replies so far

View Oldtool's profile

Oldtool

1919 posts in 939 days


#1 posted 05-21-2014 12:30 AM

Ben,
You’ll probably get as many different answers to this as the number of responses, so here’s my take:
Cherry is In my opinion beautiful all by itself, and it gets better with age. I’ve used cherry on several projects, the first of which I applied TransTint Cherry dye. This darkened the table immediately, simulating an antique appearance, which I locked in with Arn-R-Seal satin wiping varnish. Sorry, no photos of this.
The next two projects simply had the Arm-R-Seal, which is easy to apply, and to fix if a mistake happens. One of these can be viewed at: http://lumberjocks.com/projects/82590
I like this natural finish, and it’s been getting darker as it sits in the sunlight of the room.
Long story short, I recommend either the Arm-R-Seal, or Minwax’s Antique Oil Finish – which I’ve also used to my satisfaction.

-- "I am a firm believer in the people. If given the truth, they can be depended upon to meet any national crisis. The point is to bring them the real facts." - Abraham Lincoln

View wncguy's profile

wncguy

228 posts in 1061 days


#2 posted 05-21-2014 12:44 AM

Ben – I’ve used Arm-R-Seal for my boxes, some with cherry & happy with the results. Just fiiniishing some more that have cherry & will be posting as project in next few days.

-- Any man can be a father, but it takes someone special to be a Dad

View newwoodbutcher's profile

newwoodbutcher

389 posts in 1599 days


#3 posted 05-21-2014 05:02 AM

I’ve built a lot of stuff out of cherry, I love it. I’ve landed on two “finishing” approaches. I like just plain cherry, no color added, poly wipe 4-5 coats, that’s it. My second and perhaps favorite is to wipe it down with Potassium Dichromate 50% diluted. This ages the cherry almost instantly. Then I wipe in a Liberon Furniture Oil (pricey but great) or the top coat of your choice. I like the Potassium Dichromate be cause it not only instantly ages the wood But it keeps the color as the piece naturally ages. They say it’s toxic so I always wear a mask and gloves but it’s water based so clean up is a snap. Worth a try. You may never go back to stain. Here’s what it looks like.

-- Ken

View Bill7255's profile

Bill7255

201 posts in 1033 days


#4 posted 05-21-2014 11:45 AM

Cherry is fantastic. Don’t use any color stain and finish it naturally. Above methods are good, I have also use min wax natural stain (no color) on cherry.

-- Bill R

View bonesbr549's profile

bonesbr549

285 posts in 1816 days


#5 posted 05-28-2014 02:29 AM

I used waterlox on cherry for years on vert surfaces with no issues. I spray just don’t go to heavy. I’ve since switched to waterbase as the dry time between coats is just too much and the VOC’s really bad. Now I use general finishes high performance. If oil is a must for you then Arm-r-seal. Nothing imparts the amber hue of waterlox on cherry though (IMO). I now use high performance exclusively unless the client demands an oil finish. It’s so much nicer to clean up as well. I also love being able to put 3 coats on in an afternoon.

View Ben's profile

Ben

204 posts in 1606 days


#6 posted 06-09-2014 09:57 PM

thanks guys.
do you think one could notice the difference between minwax antique oil and arm-r-seal satin?
the minwax is available locally and i told the customer i’d make up some samples.
don’t want to order the arm-r-seal unless it’s a different look.

View squazo's profile

squazo

21 posts in 394 days


#7 posted 06-09-2014 10:09 PM

I had a piece of cherry that I had put gloss poly, like 4 coats on and then had a friend of mine who professionally polishes cars to come over and shine it up with his car polishing equipment. very nice and so smooth and shiny.

View CharlesA's profile

CharlesA

1929 posts in 546 days


#8 posted 06-09-2014 10:37 PM

I can’t compare minwax antique oil and arm-r-seal, but I definitely prefer arm-r-seal to standard minwax wipe-on poly. Love Arm-r-seal on cherry, but the color definitely darkens over time—so it is not ideal if someone wants it to look on day 1 like it will on day 365.

-- "Man is the only animal which devours his own, for I can apply no milder term to the general prey of the rich on the poor." ~Thomas Jefferson

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase