LumberJocks

Motherload of Pallet Wood

  • Advertise with us

« back to Wood & Lumber forum

Forum topic by Mark Burton posted 05-14-2014 03:41 AM 1213 views 0 times favorited 11 replies Add to Favorites Watch
View Mark Burton's profile

Mark Burton

13 posts in 948 days


05-14-2014 03:41 AM

The guys in my shipping and receiving dept practically begged me to take away the pallets stacked up next to our dock. I told them I’d take a few and at least put a dent in the pile, but I had no idea how many we had until I really got a look. There’s got to be at least 40 pallets, mostly new, plus one huge plywood crate. If only I had the space. Needless to say, I’ll have all the bits I need to get some practice in on my router and maybe even churn out something useful. I’ll post pics for sure.


11 replies so far

View mabisme's profile

mabisme

13 posts in 952 days


#1 posted 05-15-2014 01:53 AM

are there any oak? I brought some home from work, made a nice makeup table for the wife, a frame for 2 dry erase boards and finishing up a floor cabinet for the bathroom. A little work cleaning and planning but for free it was worth it!

-- Mark , Northern Cali.

View Mark Burton's profile

Mark Burton

13 posts in 948 days


#2 posted 05-15-2014 04:30 AM

Probably, there are some really hard slats in there. I’m not looking forward to pulling these apart, but I am looking forward to playing around with it.

View runswithscissors's profile

runswithscissors

2192 posts in 1492 days


#3 posted 05-15-2014 07:13 AM

I figured out a couple of tricks to help salvage pallet wood. First, don’t think you can save it all. Decide which part you can sacrifice—either the flat boards or the vertical timbers. I usually wanted the thicker stuff. Then you saw away the stuff you aren’t going to keep, and can easily split out the short bits of board remaining and get a vice grip on the nails. Use a big crowbar under the vice grip to pull out the twisty nails, which are very difficult otherwise.

A circular saw with a cheap, throwaway blade, or a recip saw with a nail cutting blade work well. The scrap makes good firewood.

-- I admit to being an adrenaline junky; fortunately, I'm very easily frightened

View Mark Burton's profile

Mark Burton

13 posts in 948 days


#4 posted 05-15-2014 08:48 AM

I’ve tried it with a pry bar and hammer, which yielded mixed results. One of the main things I want to build with this wood is a herringbone (chevron pattern) wall feature. I figure that will be a good starting point for me to get familiar with my new (to me) planer and handsaw. So, I’m going to want to keep as many longer boards as I can, but I’m not going to kill myself over it either. I can always glue the ones that split at the ends.

View bigblockyeti's profile

bigblockyeti

3668 posts in 1187 days


#5 posted 05-15-2014 12:43 PM

We’ve had some flooding in my area due to April showing up a month late this year. In the creek I found a not too old looking pallet, so I yanked it out and while not that big, the whole thing is oak and maple. It was also made with ring shank nails which were very difficult to remove from sound hardwood.

View PaulDoug's profile

PaulDoug

1096 posts in 1170 days


#6 posted 05-15-2014 02:10 PM

There are all types of youtube videos on how to break down pallets. There is a tool you can buy or make for prying them apart. It would be a simple tool to make.

-- “We all die. The goal isn't to live forever; the goal is to create something that will.” - Chuck Palahniuk

View JAY Made's profile

JAY Made

191 posts in 1511 days


#7 posted 05-15-2014 02:56 PM

Check this out.

-- We all should push ourselves to learn new skills.

View Mark Burton's profile

Mark Burton

13 posts in 948 days


#8 posted 05-15-2014 10:09 PM

Huh. I’ll have to look around and see what I can scrounge up. From looking around, it seems like most people’s methods incorporate applying a lot of force very quickly, rather than the small amount of force I was able to apply to the boards with a 12” prybar and hammer. Obviously, the more surface area I can spread the force over, the better. I could probably get a couple of wrecking bars from Harbor Freight and whip up something similar to that link from JAY Made (thanks for that, btw). I saw one video where a guy was using a couple slabs of concrete; one to support the board and one to drop on the pallet. I think I’d rather use force through leverage than through gravity, though.

View mabisme's profile

mabisme

13 posts in 952 days


#9 posted 05-15-2014 11:07 PM

I just used a sledge hammer. Supported the boards I wanted to keep and beat on the ones I was scrapping, it went surprisingly fast. then used a claw hammer and block of scrap under it to pull the nails. ( they are difficult to get out ) I did about 20 pallets in total.

-- Mark , Northern Cali.

View Steve Peterson's profile

Steve Peterson

325 posts in 2549 days


#10 posted 05-16-2014 03:56 AM

I wouldn’t bother with tearing them apart. I would just skillsaw next to the middle beams to end up with 1×4 pieces about 20” long.

Nobody has mentioned it yet, but you do have to be careful what you make out of the pallets because you don’t know if the wood has been treated with insecticides. Don’t risk making anything that might come in contact with food. No cutting boards or glued up salad bowls.

-- Steve

View b2rtch's profile

b2rtch

4823 posts in 2515 days


#11 posted 05-16-2014 10:28 AM

I get pallets and crates from work all the time this is the only wood I use, I never buy wood.
I get nice wood from Japan through work.

-- Bert

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com