LumberJocks

Entire woodshop for sale

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by woodwrkff posted 05-09-2014 at 09:05 AM 1012 views 1 time favorited 11 replies Add to Favorites Watch
View woodwrkff's profile

woodwrkff

5 posts in 115 days


05-09-2014 at 09:05 AM

Hello, new to this forum and I am not sure where to post something like this. I am selling an entire woodshop full of tools including a 16” bandsaw, 20” planer, 10” jointer, drill press, table saw, router table, dust collector, etc… Wondering if there was a particular forum where I could post these items? Thanks for the help in advance


11 replies so far

View Monte Pittman's profile (online now)

Monte Pittman

13866 posts in 975 days


#1 posted 05-09-2014 at 09:20 AM

Right place, but where are you located and please list what you have.

Welcome to Lumberjocks. I hope this isn’t the end for you.

-- Mother Nature created it, I just assemble it. - It's not ability that we often lack, but the patience to use our ability

View ducky911's profile

ducky911

214 posts in 1426 days


#2 posted 05-09-2014 at 09:22 AM

your location would be a good start.

View woodwrkff's profile

woodwrkff

5 posts in 115 days


#3 posted 05-09-2014 at 09:24 AM

I am in Las Vegas, NV

View Monte Pittman's profile (online now)

Monte Pittman

13866 posts in 975 days


#4 posted 05-09-2014 at 09:44 AM

I am building a new shop and probably need what you have. Just not sure it’s feasible at the distance. What do you have?

-- Mother Nature created it, I just assemble it. - It's not ability that we often lack, but the patience to use our ability

View woodwrkff's profile

woodwrkff

5 posts in 115 days


#5 posted 05-09-2014 at 10:01 AM

I have a Grizzly Extreme 20” Planer and 10” Jointer that have spiral cutter heads (really heavy duty machines weighing over 1,000 lbs each) I have a Minimax 16” Bandsaw that is one of the best out there, I have a Delta drill press, I have a router table that is personally made by myself out of solid maple (furniture grade with raised panel doors and dovetailed drawers) and jessum top, router lift, and fence, I have a Canadian-Made General 10” table saw, I have a Delta dust collector. My story is that I had a house with a 3-car garage and had a full woodshop setup in here. I sold the house and downsized quite a lot to where I don’t have room for anything any longer. I really have no choice but to sell the equipment as I am now paying to have it in storage. Most of this equipment is commercial quality and when I had it delivered, the driver said he had never seen equipment like this go to a residential home. It has all only been lightly used for personal projects around the house (some machines such as the bandsaw only have about a half hr of total use) I also have several portable tools and jigs as I really dove head first into this great hobby! I have quite a lot of lumber that is rough sawn alder and some maple left over from previous projects that I am going to sell. I can post model #’s and pics if there are people that are potential serious buyers. Thanks

View EastLake's profile

EastLake

45 posts in 174 days


#6 posted 05-09-2014 at 11:54 AM

I would be interested in the planer and drill press if you are somewhere near New York.

-- Mark, Western New York, East Lake Woodcraft

View kdc68's profile

kdc68

1968 posts in 914 days


#7 posted 05-09-2014 at 11:57 AM

EastLake....see post #3….

-- Measure "at least" twice and cut once

View woodchuckerNJ's profile

woodchuckerNJ

876 posts in 271 days


#8 posted 05-09-2014 at 03:14 PM

woodwrkff, you should post pics here.
But I also think you might be better on ebay to get the highest price.
But if you are only interested in getting the price you want, then post it here, as there are many who might be interested.

Good luck, sorry that you have to give up this wonderful hobby.

-- Jeff NJ

View Hammerthumb's profile

Hammerthumb

1222 posts in 612 days


#9 posted 05-09-2014 at 03:16 PM

I sent you a pm. I might be interested in taking a look.

-- Paul, Las Vegas

View woodwrkff's profile

woodwrkff

5 posts in 115 days


#10 posted 05-09-2014 at 06:28 PM

Thanks for your help guys. I will list the details along with some prices as soon as I get some time to do it.

View woodwrkff's profile

woodwrkff

5 posts in 115 days


#11 posted 05-10-2014 at 06:52 PM

Hammerthumb, just saw this and I will check my PM.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase