Problem with my Jet combination jointer/planner

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by fisherdoug09 posted 163 days ago 418 views 0 times favorited 2 replies Add to Favorites Watch
View fisherdoug09's profile


81 posts in 1307 days

163 days ago

Topic tags/keywords: planer

I purchased a combination Jet jointer/planner in Aug. this past year. When I 1st started planning with it I was taking too much off in 1 pass, motor got hot and shut down. But yesterday I was planning some Blood wood taking very shallow cuts and the motor got hot and shut down again. I let it cool down and just started it up again. Without even running wood through it it got hot within a minute or so and shut down. Does anyone who owns a Jet combo tool have any ideas or had the same problem.

2 replies so far

View WhyMe's profile


83 posts in 194 days

#1 posted 163 days ago

What voltage is it running on? Are you using an extension cord? Voltage drop can cause motor to over heat and trip thermal overload protection switch.

View retfr8flyr's profile


193 posts in 302 days

#2 posted 163 days ago

What model is it? It sounds like something has failed in either the motor itself, or the electronics.

-- Earl

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

Latest Projects | Latest Blog Entries | Latest Forum Topics :: gardening showcase