Ridgid JP0610 jointer

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by woodworkingdrew posted 03-08-2014 05:32 AM 1597 views 0 times favorited 7 replies Add to Favorites Watch
View woodworkingdrew's profile


190 posts in 1847 days

03-08-2014 05:32 AM

Hello, I purchased a Ridgid JP0610 jointer today. Seems to be a good buy. No rust, in decent shape, and seems to cut well. My question is does anyone own one of these or have any past experiences with them? Just want to know the history on this machine and how well its held up over the years. Thanks!

-- Andrew, California

7 replies so far

View NiteWalker's profile


2738 posts in 2815 days

#1 posted 03-08-2014 06:25 AM

It’s a pretty good machine.
How much did you pay?

-- He who dies with the most tools... dies with the emptiest wallet.

View Tom's profile


185 posts in 1958 days

#2 posted 03-08-2014 06:44 AM

I picked one up for $150 and it is far better than the Delta bench top I had before that, my only complaint would be it tends to let the shavings get clogged up, but I only have a shopvac with a dust deputy, if you have 4” it should work fine, I am certainly happy with mine.

-- --Tom - Saint Francis, WI

View woodworkingdrew's profile


190 posts in 1847 days

#3 posted 03-08-2014 12:31 PM

I paid 220.00 for it

-- Andrew, California

View toolie's profile


2148 posts in 2866 days

#4 posted 03-08-2014 12:47 PM

Not too bad. I got mine NIB @ HD for $150 as it was “missing parts”. Turns out it was only missing the little yellow safety key insert. When wood magazine last tested 6” jointers, the ridged was rated a best value.

-- there's a solution to every just have to be willing to find it.

View knotscott's profile


8178 posts in 3613 days

#5 posted 03-08-2014 12:51 PM

It’s pretty much the same tool as the older Grizzly 1182, Jet, GI, Sunhill, Woodtek, Bridgewood, etc…..all very well proven. My 1182 was new in 2001, and hasn’t hiccupped once.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View woodworkingdrew's profile


190 posts in 1847 days

#6 posted 03-08-2014 03:46 PM

Thanks for all the feedback. I messed around with the thing last night, and noticed a lot of tearout at the end of the board. I adjusted the outfeed table and it seemed to make it better. I think it needs some adjusting.

-- Andrew, California

View gotnonickname's profile


29 posts in 1810 days

#7 posted 03-09-2014 02:09 AM

I have used that jointer now for 2 years. excellent product. Never an issue. Excellent dust collection even with a Oneida and Fein shop vac setup. Keep that tables treated so you don`t get rust and I wax mine after a long day of use. I installed mine on a HTC 2000 to move around the garage. I use a OneWay multi tool for setup and I find that to be the best tool for setting knives and outfeed table. Since I am in no hurry when I machine a surface, I always take lots of small cuts and end up with very nice flat clean cuts. Great buy, enjoy

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics