LumberJocks

Craigslist Purchases

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by jeff posted 187 days ago 820 views 0 times favorited 9 replies Add to Favorites Watch
View jeff's profile

jeff

643 posts in 2098 days


187 days ago

Topic tags/keywords: dust collector air filter

very happy with these purchases and desperately needed in my small shop.Penn State 1 1/2 hp dust collector with 1 micron bag-came with several wys and blast gates…

delta 50-860 air filter-850 cfm,one 12×24 outer filter and one pleated inner filter…dust collector $150.00-air filter $100.00 total $250.00-both in excellent shape with very little use…the air filter sits above my lathe-the dusty outer filter pic is all from 3 lathe tool handle

and 3 bottle stopper turning’s…thx for looking…

-- Jeff,Tucson,Az.


9 replies so far

View NormG's profile

NormG

4112 posts in 1637 days


#1 posted 187 days ago

Congrats – they will be a valued addition to your shop

-- Norman

View DIYaholic's profile

DIYaholic

13324 posts in 1308 days


#2 posted 187 days ago

Great CL score….
Not only the price….
But great additions to the shop!!!

-- Randy-- I may not be good...but I am slow! If good things come to those who wait.... Why is procratination a bad thing?

View toolie's profile

toolie

1742 posts in 1262 days


#3 posted 187 days ago

Good deal. Tools bought below retail always work better than full price tools.

-- there's a solution to every problem.......you just have to be willing to find it.

View Picklehead's profile

Picklehead

568 posts in 563 days


#4 posted 187 days ago

I should go look in my shop to make sure they’re still there. Those are both exactly the same as mine. Been satisfied with both, although since you only paid about 60% of what I paid, you get an official “you suck”. Nuthin’ personal. That dust collector does just fine with multiple runs, as long as only one is open at a time. Good buy, and goodbye.

-- You've got to be smarter than the tree.

View Newbiewoodworker43's profile

Newbiewoodworker43

130 posts in 1076 days


#5 posted 187 days ago

Nice score! Looks like a great system.

I have been searching for a dust collection system on CL. I have a small shop in my basement and currently have a mitre saw, table saw, band saw and thickness planar. When you were choosing the dust collection system what did you look for (besides a good price)? What hp, what micron bag, etc.

Any information would be appreciated.

-- ---Howard, Amesbury MA

View jeff's profile

jeff

643 posts in 2098 days


#6 posted 187 days ago

Thx Picklehead…,I will go and put them back,I would say I found a good deal :)...Just by the looks of the outer filter I know the air filter is working well and the dust collector does a nice job at my lathe-overall a cleaner environment-I still wear a mask though…Can’t wait to start planning dust collection runs to my tools…Glad to hear you like them also…
Newbiewoodworker,I researched here on LJ’s/internet for small shop DC and air filters…For small shop needs a 1 1/2 hp DC was recommended to help move air for table saw/planer/jointer dust collection-1 tool at a time though…Everyone makes air filters-I wanted one that was not loud- had mult. speeds,if I could find one…My air filter has one speed-but I was happy in the fact it is not loud…The DC just happened to have a 1 micron bag,lucky again,if not I was going to add a lower micron canister filter…Basement shops from what I have read can be tricky for dust collection because dust can enter your home…Thx…

-- Jeff,Tucson,Az.

View Jim's profile

Jim

118 posts in 2631 days


#7 posted 186 days ago

I have the same dust collector had it about 5 years and only problem is the switch went out, not a problem I have it on a wall switched outlet.

-- Jim in Cushing Oklahoma

View toolie's profile

toolie

1742 posts in 1262 days


#8 posted 186 days ago

when you get around to it, adding a baffle to the drum ring will send more collected material to the collection bag as opposed to the filter, enabling the collector to maintain volume longer between cleanings. here’s my modification to a 50-850 (similar to your PSI collector):

http://lumberjocks.com/topics/40189

-- there's a solution to every problem.......you just have to be willing to find it.

View jeff's profile

jeff

643 posts in 2098 days


#9 posted 186 days ago

toolie,I will place it in my favorite list and thx…

-- Jeff,Tucson,Az.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase