LumberJocks

Table saw vibration

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Bighig50 posted 01-08-2014 10:38 PM 975 views 0 times favorited 7 replies Add to Favorites Watch
View Bighig50's profile

Bighig50

8 posts in 1084 days


01-08-2014 10:38 PM

Topic tags/keywords: vibration

I have a craftsman job site 10 inch table saw . I received a dewalt 80 t for Christmas When I turn on the saw the table saw vibrates real bad anything on the table saw while on will dance all over the table . I took it off put on a new 40 t and it runs smooth should the 80 t vibrate the table like I explained. Many thanks Bighig

-- Bighig South Carolina


7 replies so far

View oldnovice's profile

oldnovice

5721 posts in 2828 days


#1 posted 01-08-2014 11:07 PM

I would check the blade as it may be unbalanced, otherwise I do not know why it would do that.

-- "I never met a board I didn't like!"

View BArnold's profile

BArnold

175 posts in 1293 days


#2 posted 01-08-2014 11:56 PM

It sounds like you have your answer already. If one blade does not cause vibration and another does, it’s gotta be a bad blade.

-- Bill, Thomasville, GA

View Bighig50's profile

Bighig50

8 posts in 1084 days


#3 posted 01-09-2014 01:53 AM

I am new to woodworking I have been doing it for about a year now . I just wanted to find out with a blade with more t would cause such vibration.many thanks Bighig

-- Bighig South Carolina

View oldnovice's profile

oldnovice

5721 posts in 2828 days


#4 posted 01-09-2014 02:51 AM

I have gone from as few as 12 teeth to as many as 80 teeth and the only difference I can determine is a “wind like” noise with the 80 tooth blade, and no vibration.

-- "I never met a board I didn't like!"

View Bighig50's profile

Bighig50

8 posts in 1084 days


#5 posted 01-09-2014 02:55 AM

Many thanks the blade is going back you all have been a big help!!

-- Bighig South Carolina

View Bighig50's profile

Bighig50

8 posts in 1084 days


#6 posted 09-13-2014 01:53 AM

I know it’s a little late but it was a bad blade many thanks

-- Bighig South Carolina

View knotscott's profile

knotscott

7208 posts in 2836 days


#7 posted 09-13-2014 01:58 AM

Better late than never….thanks for the update!

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com