infeed table saw extension

  • Advertise with us

« back to Jigs & Fixtures forum

Forum topic by grenger posted 12-24-2013 01:19 AM 8689 views 2 times favorited 6 replies Add to Favorites Watch
View grenger's profile


199 posts in 3363 days

12-24-2013 01:19 AM

Topic tags/keywords: jig tablesaw

looking for different plans to make a infeed table saw extension for my bosch table saw. I have seen this one. Any new ideas/design/plans would be appreciated

-- Gerry (the beginner), Gatineau, QC, Canada

6 replies so far

View bondogaposis's profile


4725 posts in 2347 days

#1 posted 12-24-2013 01:34 AM

I don’t know, seems like anything you do would get in the way of the rip fence. Why do you need an infeed table?

-- Bondo Gaposis

View gfadvm's profile


14940 posts in 2686 days

#2 posted 12-24-2013 02:26 AM

I considered on of those when I owned my first tablesaw to expand my crosscut ability but after further study, I build a tablesaw sled (Eagle Lake Woodworking video) which worked out better in my opinion.

-- " I'll try to be nicer, if you'll try to be smarter" gfadvm

View GT350's profile


368 posts in 1977 days

#3 posted 12-24-2013 02:40 AM

I may be missing something but isn’t an infeed table going to get in the way? I mean my arms aren’t that long to be able to push the wood past the blade, so I would be leaning way over.

View grenger's profile


199 posts in 3363 days

#4 posted 12-24-2013 12:54 PM

humm, lots of good comments.
the reason is that when i use my sled. At the start I need to pull it quite a bit back (To squaare a 17 inches cutting board) and the sled wants to hang over the table or drop off the table
That is why this model is a narrow extention i think so that he can stand on the side of it when pushing is sled.
I have an INCRA miter sled. I also have an other type os sled which also can give me this problem.


-- Gerry (the beginner), Gatineau, QC, Canada

View woodman88's profile


144 posts in 2644 days

#5 posted 12-24-2013 01:32 PM

try making a panel cutting sled with the fence of the sled at the front instead of the rear,it works for me to solve that problem

View Pimzedd's profile


602 posts in 4139 days

#6 posted 12-24-2013 05:51 PM

Take a look at

I used a similar device when I worked in a plastic fab shop. In place of the roller stand, we just had a piece of plywood as a leg. The leg was attached with a piece of continuous hinge and folded up against the table for storage. I cut many 4 ft. x 8 ft. sheets of plastic, some at thick at 1 in. by myself.

-- Bill - Mesquite, TX --- "Everything with a power cord eventually winds up in the trash.” John Sarge , timber framer and blacksmith instructor at Tillers International school

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics