jet jj6csx table alignment

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by knotheadswoodshed posted 12-08-2013 03:24 PM 802 views 0 times favorited 1 reply Add to Favorites Watch
View knotheadswoodshed's profile


225 posts in 2345 days

12-08-2013 03:24 PM

Hi all,
been busy re-building my shop since a move.
I have been having issues with my jointer beds being not co-planer.
I figured as long as I was upgrading to a shelix head, I would fix this at the same time but I am not having any success at all.
Everything I find regarding bed alignment relates to the OUTFEED side, but it appears that my INFEED side is the culprit as it looks like it drops off on that end. I tried using my I-Gaging straight edges but found that they are worthlessly bowed
any help would be greatly appreciated.

-- Randy - "I dont make mistakes, I make design change opportunities"

1 reply so far

View dclark1943's profile


270 posts in 2360 days

#1 posted 12-08-2013 04:10 PM

Randy, Can’t you just leave the infeed table alone, and even if it does drop off – - align the outfeed with it. I think you can do this by using the setscrews on the outfeed table gibs.

-- Dave, Kansas City

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics