LumberJocks

Bosch 1615evs in 220 volt

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by bowedcurly posted 12-02-2013 11:59 PM 756 views 0 times favorited 28 replies Add to Favorites Watch
View bowedcurly's profile

bowedcurly

499 posts in 473 days


12-02-2013 11:59 PM

I bought a 1615 Bosch in 220 volt off ebay I was wondering what you guys thik about the 220 router, Im just hoping it hasn’t been rewired back to 110v but Im gonna have it checked, before I use it, OK Im ready for my bashin

-- Staining killed the wood<<<<<>>>>>Dyeing gave it life


28 replies so far

View bowedcurly's profile

bowedcurly

499 posts in 473 days


#1 posted 12-04-2013 07:34 PM

guess I will go to router forums and talk to those guys

-- Staining killed the wood<<<<<>>>>>Dyeing gave it life

View bowedcurly's profile

bowedcurly

499 posts in 473 days


#2 posted 12-04-2013 07:35 PM

hey that is a mystery router you could be in trouble

-- Staining killed the wood<<<<<>>>>>Dyeing gave it life

View bowedcurly's profile

bowedcurly

499 posts in 473 days


#3 posted 12-04-2013 07:35 PM

gee thanks hell I don’t even have it yet

-- Staining killed the wood<<<<<>>>>>Dyeing gave it life

View bowedcurly's profile

bowedcurly

499 posts in 473 days


#4 posted 12-04-2013 07:36 PM

I bought it from a jewellry store on ebay got a good deal, looks in good shape

-- Staining killed the wood<<<<<>>>>>Dyeing gave it life

View bowedcurly's profile

bowedcurly

499 posts in 473 days


#5 posted 12-04-2013 07:37 PM

it could use oil, does it smoke? they use alot of gas with that big engine

-- Staining killed the wood<<<<<>>>>>Dyeing gave it life

View bowedcurly's profile

bowedcurly

499 posts in 473 days


#6 posted 12-04-2013 07:39 PM

hell no I think it’s diesel Im puttin a couple turbo’s on it, might smoke a little

-- Staining killed the wood<<<<<>>>>>Dyeing gave it life

View bowedcurly's profile

bowedcurly

499 posts in 473 days


#7 posted 12-04-2013 07:40 PM

think you can pull a big plow with that supercharged diesel, I need my garden plowed

-- Staining killed the wood<<<<<>>>>>Dyeing gave it life

View bowedcurly's profile

bowedcurly

499 posts in 473 days


#8 posted 12-04-2013 07:44 PM

gonna buy that new 4 foot raised panel bit from whiteside, my router has 12 inch collet, gonna chop down a redwood and rout a airplane wing for a 797

-- Staining killed the wood<<<<<>>>>>Dyeing gave it life

View bowedcurly's profile

bowedcurly

499 posts in 473 days


#9 posted 12-04-2013 07:46 PM

thanks guys for all the help, it’s nice to be loved

-- Staining killed the wood<<<<<>>>>>Dyeing gave it life

View Grandpa's profile

Grandpa

3203 posts in 1420 days


#10 posted 12-04-2013 08:17 PM

curly, I have been busy and not on here in a couple of days. I will say you have been most entertaining. Personally, I have never seen nor heard of a 220V router. I can believe they use them in Europe but not in the U.S. Do you think you really need a 220V router or was it just cheap because no one has a 220V receptacle on their bench. Most interesting.

View bowedcurly's profile

bowedcurly

499 posts in 473 days


#11 posted 12-04-2013 11:24 PM

yes they make them in US I think, I see alot of 220 porter cables on Ebay guess large shops use them I will write a review when I use it some router forum guys like the 220 volt router thanks for tha love have a god day and make some dust

-- Staining killed the wood<<<<<>>>>>Dyeing gave it life

View dahenley's profile

dahenley

127 posts in 837 days


#12 posted 12-05-2013 12:07 AM

check it and see if its 50 or 60hz
that will say if its for us or european 220.

if its US, then its probably a bad A$$ router haha

-- David Henley

View Grandpa's profile

Grandpa

3203 posts in 1420 days


#13 posted 12-05-2013 04:20 AM

The motor should be okay whether 50 or 60 Hz. Will run a bit slower or faster to compensate.

View bowedcurly's profile

bowedcurly

499 posts in 473 days


#14 posted 12-05-2013 06:05 PM

it’s a 60hz UL listed so I guess it be americano, gonna put it in my router table need a variable speed for raised large panel bits, and thanks for the help any other help will be greatly appreciated, I have a 25amp breaker with an outlet I ran for my jointer planer and Tablesaw will I be able to use that outlet or should I put in less amp breaker for the router? that info I really need to know before I blow something up, and again thanks for your help I can’t thank you enough, have a god day

-- Staining killed the wood<<<<<>>>>>Dyeing gave it life

View bowedcurly's profile

bowedcurly

499 posts in 473 days


#15 posted 12-07-2013 12:04 AM

I need some help with this router it has a standard plug but says model no 06016150734

1150 v =15a

12000-19000 /MIN is it 220 or standard

-- Staining killed the wood<<<<<>>>>>Dyeing gave it life

showing 1 through 15 of 28 replies

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase