LumberJocks

4 hours of woodworking in 4 minutes

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by panofish posted 232 days ago 985 views 1 time favorited 21 replies Add to Favorites Watch
View panofish's profile

panofish

30 posts in 2445 days


232 days ago

Topic tags/keywords: woodworking shop tour timelapse gopro

See if you notice anything strange while I’m working in my shop :)

http://youtu.be/FabFgUG2glI

-- Alan Lilly, http://www.panofish.net


21 replies so far

View Kaleb the Swede's profile

Kaleb the Swede

1088 posts in 555 days


#1 posted 232 days ago

You have one great shop! Many hats….

-- Just trying to build something beautiful

View darthford's profile

darthford

532 posts in 510 days


#2 posted 231 days ago

Enjoyed the video thanks!

View bowedcurly's profile

bowedcurly

478 posts in 315 days


#3 posted 231 days ago

you is one fast dude wish my shop was heated, great video, you tha man

-- Staining killed the wood<<<<<>>>>>Dyeing gave it life

View DangerDoug's profile

DangerDoug

57 posts in 232 days


#4 posted 231 days ago

Yes fun stuff – nice project!

The clock needs fresh batteries (-; (-;

View coachmancuso's profile

coachmancuso

256 posts in 517 days


#5 posted 231 days ago

Yes the clock says more than 4 hours

-- Coach Mancuso

View toolie's profile

toolie

1714 posts in 1214 days


#6 posted 231 days ago

i noticed you need a RAS. crosscutting work pieces on the floor with a circular saw is a little too much like real work for me.

-- there's a solution to every problem.......you just have to be willing to find it.

View reedwood's profile

reedwood

858 posts in 1262 days


#7 posted 231 days ago

Fun video! Makes you realize how much time it takes to size 4/4 wood bought in the rough. I didn’t see the odd thing, I was too busy watching your methods and drooling on your shop floor.

I’m jealous of your Bessy clamps. I don’t know why I didn’t pop for those instead of 3/4 pipe clamps. nice.

random thoughts: I use a 6 or 8” wood clamps for the ends instead of grip vises to ensure alignment and to keep it straight. Also, I noticed you orbit sanded the glue joints which probably took forever and I wondered if you couldn’t have run the panels through a planer and then cut to length to remove any snipe? Were they too wide?

BTW – You could have set up a sheet of plywood on horses to make all those end cuts. I can say, you won’t be doing that when your 57. made my back hurt just watching you crawl around in high speed!.... Ha!

I use to use a roller out feed like that until one time it kicked sideways a little, right in the middle of cutting a large panel and it rolled the panel to the right and almost bit me. I switched to one that had ball bearings on top and a heavier stand – big difference! I eventually bought the delta out feed table for my Unisaw which folds down for small work. I love it except it tends to turn in to a work bench I have to clear to use the saw. It looks like your rolling work station is the right height for an out feed table.

that is definitely one nice shop. Thanks for the cool video.

-- mark

View whitebeast88's profile

whitebeast88

3382 posts in 776 days


#8 posted 231 days ago

great video,that’d be 4 months of woodworking for me!!!!

-- Marty.Athens,AL

View panofish's profile

panofish

30 posts in 2445 days


#9 posted 231 days ago

Kaleb was quick to catch the hat changes.

@coachmancuso, the timelapse was recorded over weeks … capturing 67000 images captured at 1 every 2 seconds for a total of 35 hours of footage. I then selectively edited the footage and compressed time further to fill the music clip I had. So the amount of real time shown during the 3.5 minutes is about 3.5 hours. :)

@reedwood, I have many 3/4 pipe clamps, but just got a good deal on the jorgensen clamps. My glue joints were actually pretty good and needed very little sanding and most of the panels were wider than my 13” jointer.
Actually I have a bad back, but I find that giving it a careful workout helps.

Next time, I will probably just find some quality plywood :)

Thanks for watching guys and gals!

-- Alan Lilly, http://www.panofish.net

View shipwright's profile

shipwright

4807 posts in 1384 days


#10 posted 231 days ago

Very fun video. I’ve done a time lapse marquetry assembly and an animation and stopped short of adding music because of copyright issues. Can I ask where you got the music? Did you or a friend record it especially for the video?
I got a copyright notice from YouTube for just distant background radio music on a French polish video I did.

You achieved a great effect with this, thanks for posting.

-- Paul M ..............If God wanted us to have fiberglass boats he would have given us fiberglass trees. http://prmdesigns.com/

View panofish's profile

panofish

30 posts in 2445 days


#11 posted 231 days ago

@shipwright
Great question! I too have gotten notices from youtube in the past for Final cut pro music which was totally royalty free, but the music was still part of youtube robotic music detection, so rather than argue, I just stopped using music. HOWEVER, youtube recently started provided music that they say IS free to use. You can find it under your youtube video manager, under “creation tools”. The selection is somewhat limited, but its there :)

-- Alan Lilly, http://www.panofish.net

View a1Jim's profile

a1Jim

111999 posts in 2163 days


#12 posted 231 days ago

Very cool Alan and fun ,Maybe you should cut back on the coffee a bit LOL

-- http://artisticwoodstudio.com Custom furniture

View shipwright's profile

shipwright

4807 posts in 1384 days


#13 posted 231 days ago

Thanks Alan.
Have a look at this and you can see how badly it needs music.
It was a lot of fun and surprisingly easy. I will likely do more so thanks again for this answer.

-- Paul M ..............If God wanted us to have fiberglass boats he would have given us fiberglass trees. http://prmdesigns.com/

View helluvawreck's profile

helluvawreck

15278 posts in 1452 days


#14 posted 231 days ago

Hey, slow down; smell the flowers; take a break. It makes no sense to work yourself to death like that. Besides, your bound to cut a few fingers off sooner or later.

nice video.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View BigJerryWayne's profile

BigJerryWayne

133 posts in 688 days


#15 posted 231 days ago

Coffee pot was empty.

-- An oak tree is just a nut that stood it's ground.

showing 1 through 15 of 21 replies

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase