LumberJocks

Some of the best turning videos ever!

  • Advertise with us

« back to Woodturning forum

Forum topic by RolfBe posted 11-15-2013 09:33 PM 1125 views 2 times favorited 9 replies Add to Favorites Watch
View RolfBe's profile

RolfBe

28 posts in 503 days


11-15-2013 09:33 PM

Steve’s videos are very clear sharp and really show you what to do with the tools.
His chucks and turning tools are also excellent.
OOPs forgot the link

http://www.youtube.com/Thewoodturningshop

-- "I don't know that I can't, therefore I can" Hawk G4 ss, New Nova 16-24 DVR XP


9 replies so far

View Bill White's profile

Bill White

3498 posts in 2649 days


#1 posted 11-15-2013 09:42 PM

Uh…...Steve? Steve who, where, links?
Bill

-- bill@magraphics.us

View Wildwood's profile

Wildwood

1100 posts in 823 days


#2 posted 11-15-2013 09:52 PM

My link better than yours!
http://vimeo.com/woodturning/videos

-- Bill

View RolfBe's profile

RolfBe

28 posts in 503 days


#3 posted 11-15-2013 10:45 PM

We are going to beat up on the new Guy. (Grin) I edited my post Bill
Wildwood, you are right great link! never saw that before.

-- "I don't know that I can't, therefore I can" Hawk G4 ss, New Nova 16-24 DVR XP

View Wildwood's profile

Wildwood

1100 posts in 823 days


#4 posted 11-16-2013 09:02 PM

Steve forgot a lot about wood tuning chucks. When first got into woodturning could buy a couple different Axminster chucks from several venders. The article linked here was the most informative article ever published in a magazine. Russ Fairfield also did a nice review, think his article still on-line.

Of course personal preference and opinions from woodturners all over the map. One reason bought my Oneway Talon, not available when article written was due to positive feedback on Oneway chucks in the article. Have not been disappointed. Did not charge extra for threaded insert to fit my lathe, did for my second Talon.

When first got into turning and for several years after the major manufacturers were Axminster, Nova, Oneway, and Vicmarc. Now with so many new names and chucks made in China hard to keep up with them all. Today price more than anything determines chuck purchases.

http://books.google.com/books?id=s_YDAAAAMBAJ&pg=PA62&dq=woodturning+scroll+chucks&hl=en&sa=X&ei=K9iHUvPvHpSo4AORpIG4CA&ved=0CEwQ6AEwAjgK#v=onepage&q=woodturning%20scroll%20chucks&f=false

So yes liked Steve’s video on chucks! Just not going to run out and buy a Hurricane chuck today!

Thanks for the link enjoyed some of his other videos too.

-- Bill

View RolfBe's profile

RolfBe

28 posts in 503 days


#5 posted 11-17-2013 04:35 PM

Bill,
Like any hobby (my biggie is scrolling) there are lots of tool choices out there. It can be very intimidating for a newbie. I was fortunate to have a local turning club to help me along with my skills and tool selections.
My first chuck was detrmined by budget. It required two levers to tighten. I got a lot of use out of it but I wasn’t happy. I then bought one that had a bevel gear drive, it tended to cam out when tightening. I like the Oneway and Nova chucks they are a quality chuck. The Hurricane is just another quality choice.

-- "I don't know that I can't, therefore I can" Hawk G4 ss, New Nova 16-24 DVR XP

View helluvawreck's profile

helluvawreck

15960 posts in 1555 days


#6 posted 11-17-2013 04:43 PM

He does make good videos. I’ve just bought a nice lathe for my shop. Over the years, all I have done with lathes is to turn a few spindles and legs. I hope to change this very soon. Thanks for the post.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View RolfBe's profile

RolfBe

28 posts in 503 days


#7 posted 12-03-2013 08:36 PM

Wildwood
Bill, I just watched a couple of the Vimeo videos THANKS for that link. They really are excellent I also like his approach.

-- "I don't know that I can't, therefore I can" Hawk G4 ss, New Nova 16-24 DVR XP

View DaveDelo's profile

DaveDelo

79 posts in 1583 days


#8 posted 12-04-2013 04:55 PM

I have the 125 chuck with most of the different jaws being delivered tomorrow. After watching his videos and going back and forth in my mind about some of the more well known names, these seemed to be at least equal quality for a better price. If this turns out to be the case, I’ll probably get some extra chucks at a later date.

View RolfBe's profile

RolfBe

28 posts in 503 days


#9 posted 12-05-2013 05:55 PM

Dave you will not be disappointed.

-- "I don't know that I can't, therefore I can" Hawk G4 ss, New Nova 16-24 DVR XP

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase