LumberJocks

CRAFTSMAN TABLE SAW EXTENSIONS 103.22171

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by HillWilly posted 11-15-2013 01:31 AM 2003 views 0 times favorited 10 replies Add to Favorites Watch
View HillWilly's profile

HillWilly

54 posts in 1574 days


11-15-2013 01:31 AM

Topic tags/keywords: 10322171 table saw extensions craftsman tablesaw

I have posted fotoz of the 103.22171 in the past, that I just finished refurbishing. I window shop on ebay and craigslist all the time but don’t know enough about this saw to know which extensions will fit.

Can some one tell me which models are compatible, or the same series, or can be easily adaptable, and how to tell one from another just for research purposes?????

-- ...and whether or not it is clear to us, no doubt the universe is unfolding as it should...DESIDERATA...Max Ehrmann


10 replies so far

View Rick's profile

Rick

8287 posts in 2498 days


#1 posted 11-15-2013 02:48 AM

Try Googling Your Make & Model Number.

-- Hope Everyone Is Doing Well! .... Best Regards: Rick

View HillWilly's profile

HillWilly

54 posts in 1574 days


#2 posted 11-15-2013 03:37 AM

:

-- ...and whether or not it is clear to us, no doubt the universe is unfolding as it should...DESIDERATA...Max Ehrmann

View Rick's profile

Rick

8287 posts in 2498 days


#3 posted 11-16-2013 12:07 AM

I received your PM. It might have been better to leave it on here if that’s what your Blank Edited Comment above is about. You could have also removed the entire thing if you could still delete the comment that was there.

You stated the “Key” to what you want is in Your Second Paragraph.

I doubt that there’s anyone one on here that could directly answer any of those questions. THAT’S WHY I suggested that YOU Google it. Which “I” did. There is a TON of Information on there about this TYPE of Table Saw with the 103 Prefix.

I checked an Old Tools Site that I have Bookmarked. There were 1,450 Table saw results for 103-xxxx but none with .22171.

ALL Craftsman Table saws that have the Prefix 103 where made by The “King-Seeley Corp. Central Specialty Division.” They where bought out by Emerson in 1964. Emerson has the Manuals and Parts Info for everything they got from King Seeley

Google also has MANY IMAGE Pages of this saw. Unfortunately I have No Idea what your Saw Looks Like.

I would take an Educated Guess that your saw was made sometime in the 50’s

The Three Attachments below are rom the Site I Mentioned earlier. The 2 saws are the closest I could get to a .22171.

If you have any further Comments relating to Your Post it would be best to Post them on here, not a PM.

Sorry My Suggestion did not meet The Criteria of your Second Paragraph.

Personally. I think it’s the ONLY WAY you’re going to find the Information You are looking for.

I’m done here. Hope you find what you are looking for.

PS: Well! Something’s Going Wrong. The “Insert Image From Your Computer” is all screwed Up!! They won’t let me do it.

-- Hope Everyone Is Doing Well! .... Best Regards: Rick

View HillWilly's profile

HillWilly

54 posts in 1574 days


#4 posted 11-16-2013 12:27 AM

Now you see my confusion Rick. My saw was made by Simpson-Sears Limited, Canada and not by King-Seely. I guess what I was asking is do the extensions from a 22161 or a 22181 or a 22191 or a 22151 interchange or how does the model line work. As you said, there are 1450 results for 103.xxxx but none for the 22171.

-- ...and whether or not it is clear to us, no doubt the universe is unfolding as it should...DESIDERATA...Max Ehrmann

View Rick's profile

Rick

8287 posts in 2498 days


#5 posted 11-16-2013 01:16 AM

It has the Sears label on it but they don’t actually make those tools. As I said above. Anything with the Prefix 103 in front WAS Made by the “King Seeley”.

When Emerson bought them out the Prefix 103 Disappeared.

-- Hope Everyone Is Doing Well! .... Best Regards: Rick

View HillWilly's profile

HillWilly

54 posts in 1574 days


#6 posted 11-16-2013 01:49 AM

Hopefully someone in there has the answers I am looking for!!!

-- ...and whether or not it is clear to us, no doubt the universe is unfolding as it should...DESIDERATA...Max Ehrmann

View oldnovice's profile

oldnovice

5730 posts in 2833 days


#7 posted 11-16-2013 03:04 AM

I have a Craftsman 113.29943 TS that has a 27” deep top and the Benchdog cast iron router table fit like a glove. It fir so good that I have been considering another Benchdog router table for the other side of my TS, two routers = less setup!

IMO, the important thing is the depth as you don’t want them too long or too short. Do not buy the open web extensions, your fingers will thank you! If you can find cast iron, buy them!

I have some (3) aluminum extensions you can have for $5.00@ + shipping!
I do not like these aluminum extensions at all …. can you tell?

-- "I never met a board I didn't like!"

View tefinn's profile

tefinn

1222 posts in 1902 days


#8 posted 11-16-2013 03:48 AM

HillWilly – Rick is correct on who manufactured your saw. It was distributed by Simpson-Sears, but made by King-Seeley. As far as table extensions, any from the same table size Sears 103 series or King-Seeley will work on yours. As long as the depth is the same the bolt holes should line up exactly.

-- Tom Finnigan - Measures? We don't need no stinking measures! - Hmm, maybe thats why my project pieces don't fit.

View HillWilly's profile

HillWilly

54 posts in 1574 days


#9 posted 11-16-2013 02:04 PM

Thanx tefinn, you are articulate and have the ability to explain things so even the novice can understand, without sounding condecending. Having been around for a long time and being very knowledgable in automotive tech, I realize that it takes a different approach to convey my knowledge to a high school motor head than to another technician. I can talk cam specs all day long, but that doesnt mean a newbie will understand!!!

-- ...and whether or not it is clear to us, no doubt the universe is unfolding as it should...DESIDERATA...Max Ehrmann

View Rick's profile

Rick

8287 posts in 2498 days


#10 posted 11-22-2013 02:23 AM

**

-- Hope Everyone Is Doing Well! .... Best Regards: Rick

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com