HHS 3 - cutting board - by Tooch @ LumberJocks.com ~ woodworking community

1772 posts in 1904 days

10-01-2013 02:02 PM

Look up some different types of cutting boards on the Projects page. Find one that you really like and ”favorite” it, then post a reply with a link to it under this forum.

A “Favorited” cutting board can only be used by one person—no repeats!!

here is a link to my favorite – http://lumberjocks.com/projects/90138

-- "Well, the world needs ditch-diggers too..." - Judge Smails

8 replies so far

bbmac home \| projects \| blog 3 posts in 1755 days #1 posted 10-04-2013 01:49 PM
bbmac home \| projects \| blog 3 posts in 1755 days #2 posted 10-04-2013 01:49 PM
Chris11 home \| projects \| blog 17 posts in 1761 days #3 posted 10-07-2013 02:02 PM	http://lumberjocks.com/projects/87921
MikeyB23 home \| projects \| blog 9 posts in 1721 days #4 posted 10-10-2013 01:56 PM	http://lumberjocks.com/projects/80 the obligatory 1st end grain cutting board -- Big Triceps BABY!!!
waho6o9 home \| projects \| blog 8209 posts in 2605 days #5 posted 10-10-2013 02:06 PM	http://lumberjocks.com/projects/60658 There’s a lot of great ones, but I find the grains blend well in the one above.
JJockstrap home \| projects \| blog 4 posts in 1760 days #6 posted 10-17-2013 01:47 PM	http://lumberjocks.com/assets/pictures/projects/422737-196x130.jpg?1378869064
Tooch home \| projects \| blog 1772 posts in 1904 days #7 posted 10-17-2013 05:50 PM	http://lumberjocks.com/projects/90862 I like the geometry in the wood -- "Well, the world needs ditch-diggers too..." - Judge Smails
RedBeardsPegLeg home \| projects \| blog 2 posts in 1760 days #8 posted 10-18-2013 01:41 PM	http://lumberjocks.com/projects/86986

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	12097
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	2150
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	439
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	340
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	1399
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	4991
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	6764
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	28346
CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.	218
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	5482
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	1433
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	6295
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	1396
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	2177
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	1188
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	4808
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	2211
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	8892

	Author	Latest activity	New comments or replies since you last checked
Summer Mallet/Hammer Swap 2018	PoohBaah	06-25-2018 02:21 AM	sign in to get readership tracking
Stumpy Nubs Woodworking Journal- A truly unique online publication (part 4)	StumpyNubs	06-25-2018 02:20 AM	sign in to get readership tracking
Drill Press Cabinet #4: Restoring my 1950's Rockwell Drill Press	hjt	06-25-2018 02:07 AM	sign in to get readership tracking
Mobile Pegboard Cabinet	Mark Whitsitt	06-25-2018 02:06 AM	sign in to get readership tracking
Pappy1's Profile	Pappy1	06-25-2018 02:03 AM	sign in to get readership tracking
Ottoman and cushions for my Morris Chair	PlanBWoodworks	06-25-2018 01:54 AM	sign in to get readership tracking
Buffalo BP-J6 Jointer	Fiddler1	06-25-2018 01:54 AM	sign in to get readership tracking
Goblet emerging from branch	mj_and_hj	06-25-2018 01:52 AM	sign in to get readership tracking
China tariffs	MrRon	06-25-2018 01:51 AM	sign in to get readership tracking
Off-topic content. Click to see the post.	Rick	06-25-2018 01:48 AM	sign in to get readership tracking

HHS 3 - cutting board

8 replies so far

Have your say...

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Summer Mallet/Hammer Swap 2018

Stumpy Nubs Woodworking Journal- A truly unique online publication (part 4)

Drill Press Cabinet #4: Restoring my 1950's Rockwell Drill Press

Mobile Pegboard Cabinet

Pappy1's Profile

Ottoman and cushions for my Morris Chair

Buffalo BP-J6 Jointer

Goblet emerging from branch

China tariffs

Off-topic content. Click to see the post.

HHS 3 - cutting board

8 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...