Replaceable Cutter Heads for Turning...

  • Advertise with us

« back to Woodturning forum

Forum topic by ScrubPlane posted 09-14-2013 12:28 AM 1207 views 0 times favorited 6 replies Add to Favorites Watch
View ScrubPlane's profile


190 posts in 1614 days

09-14-2013 12:28 AM

Topic tags/keywords: tip question lathe turning

I utilize the ‘Easy Wood Tool’ turning tools and like them very much. One thing I would like, however, is a cutter that has a slight ‘inward’ facing radius (the opposite of the ‘outward’ radius one sold by Easy Wood).

Do any of you know of a brand of a cutting tool that fits this description? I’ve had no success in my surfing for one and am doubting its existence at this time…just thought I’d ask the fellow turners.

Thank you…

6 replies so far

View lew's profile


11263 posts in 3174 days

#1 posted 09-15-2013 12:14 AM

You might check with this guy- Capt. Eddie

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View Nubsnstubs's profile


809 posts in 1148 days

#2 posted 09-15-2013 03:19 AM

Scrub, I don’t think you’ll find anything like that in carbide, specifically fitting Easy Wood Tools. You could try Carbide Depot, and from there you should find other links to chase. You could also call EWT and ask if they can do a specieal grind. .......... Jerry (in Tucson)

-- Jerry (in Tucson)

View Ron Ford's profile

Ron Ford

200 posts in 1151 days

#3 posted 09-16-2013 02:42 AM

I agree with Lew and recommend calling Cap’n Eddie (Castelin) for your replacement cutter heads. One thing I found on the Easy Finisher (round) tips I got from him is that they are a bit thinner than the original that came with the EWT. Also, the screws he supplies with his did not fit my EWT chisel. No problem on either issue – I just reused the original screw that came with the tool, and put a #10 washer under the new tip. They are super sharp and WAY less expensive than the ‘store brand’.

-- Once in awhile I make something really great. Most days I just make sawdust.

View Rick M.'s profile

Rick M.

7692 posts in 1798 days

#4 posted 09-16-2013 02:56 AM

There is a guy on ebay who sells EWT carbides (the actual ones) for cheaper than I’ve seen anywhere else but I no longer have him bookmarked. They are still more expensive than Capn Eddie but a good deal if you want the exact same cutters.


View SteveKnnn's profile


66 posts in 1307 days

#5 posted 09-16-2013 03:03 AM

ScrubLane, I have to ask, why do you want the reverse curve? What improvement over the square cutter would it give you?

-- Steve in Richmond, VA

View Don Thur's profile

Don Thur

9 posts in 1677 days

#6 posted 01-27-2014 12:34 AM has excellent quality nanograde cutters at a very reasonable cost.

I am the seller and a professional turner.

-- Don

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics