Opinions on Tyzack Dovetail saws?

  • Advertise with us

« back to Hand Tools forum

Forum topic by BustedClock posted 09-07-2013 12:44 AM 1911 views 0 times favorited 5 replies Add to Favorites Watch
View BustedClock's profile


128 posts in 2487 days

09-07-2013 12:44 AM

Topic tags/keywords: tyzack dovetail saw saws

I never heard of Tyzack saws until I did some eBaying. I’m shopping for a good dovetail saw, but would like one I don’t have to spend several days making useable. Does anyone have any experience with the Tyzack dovetail saw?


-- Hey, I'm usually right twice a day! Except where they use 24 hour clocks.

5 replies so far

View Benvolio's profile


148 posts in 1896 days

#1 posted 09-08-2013 11:03 PM

no personal experience, but I’m given to understanding they’re a decent saw.

Tyzack is to saws what Record is to hand planes – not the name youo’d use for the swanky centrefold money shot, but made to the same standards …. and in terms of performance: indistinguishable from the dead posh ones.


-- Ben, England.

View sikrap's profile


1121 posts in 3324 days

#2 posted 09-09-2013 02:28 AM

I haven’t used their DT saw, but I did have one of their tenon saws a while back and she was a beaut!! Cut like buttah :) Only reason I got rid of it was because I ran into a guy who collected the Tyzacks and he REALLY wanted it.

-- Dave, Colonie, NY

View distrbd's profile


2252 posts in 2411 days

#3 posted 09-09-2013 02:44 AM

if you are shopping for a good dovetail saw I recommend Dozuki saw,I have the steel backed type and it is an amazing saw,LV sells all kinds shapes and sizes of them:,42884,50663

-- Ken from Ontario, Canada

View waho6o9's profile


8164 posts in 2542 days

#4 posted 09-09-2013 03:28 AM

Good call on the Lee Valley saws Ken.

I’m getting the following from Lee Valley. I wanted the steel backed
pull saw as well.

View BigMig's profile


424 posts in 2578 days

#5 posted 09-09-2013 04:00 PM

I visited one of the Lee Nielsen events and tried out their dovetail saws. I then ordered their dovetail saw with the thin-plate blade (0.015 in). I’ve enjoyed using it on a couple of dovetail projects already. It cuts on the push, not on the pull. I think they retail for around $125.

-- Mike from Lansdowne, PA

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics