LumberJocks

new fence for a craftsman 113.298341

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by rhybeka posted 241 days ago 733 views 0 times favorited 5 replies Add to Favorites Watch
View rhybeka's profile

rhybeka

234 posts in 1627 days


241 days ago

starting the process of poking around and trying to figure out which after market fences will work for my older Craftsman table saw, and was hoping some of you all would have traveled this road before me and may be able to enlighten my path a bit. Does anyone currently have an incra/delta/verycoolsuper tool fence they use on this or similar aged craftsman saws? Any input is greatly appreciated :)

Becky

-- aspiring jill of all trades


5 replies so far

View johnstoneb's profile

johnstoneb

518 posts in 678 days


#1 posted 241 days ago

I don’t know if this will help. I have a 10” 113 contractor’s saw that I put a Delta T2 fence on about 6 months ago and along with an Incra V120 miter guage made a real saw out of it. It now rips straight and cross cuts square. I don’t know if the T2 will fit your saw and the fence may not be available .

-- Bruce, Boise, ID

View knotscott's profile

knotscott

5154 posts in 1881 days


#2 posted 241 days ago

This “Alignarip 24/24” is a decent deal for $105 shipped. It should be a direct bolt on, and you should be able to slide the fence to the right for a 12/36 ratio. Otherwise, the Delta T2 is a nice fence at < $200 if you can find one….some mods required.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View rhybeka's profile

rhybeka

234 posts in 1627 days


#3 posted 241 days ago

Thanks B and knotscott – I’ll have to talk to the financial adviser and see if there’s money in the budget somewhere… or hope there’s another Alignarip or T2 somewhere to be found when I’m ready :)

-- aspiring jill of all trades

View 03roadking's profile

03roadking

13 posts in 441 days


#4 posted 241 days ago

rhybeka

I have the same Craftsman saw as the guy in the video link below. He put this fence on.

Here is the video of him putting it on his saw. – http://www.youtube.com/watch?v=f_FE-KHeh2o

I am seriously putting this fence system on my saw as well. It looks pretty nice.

View rweitz's profile

rweitz

89 posts in 1583 days


#5 posted 241 days ago

Hi rhybeka,

I saw your comment on my ZCI and I put on the Red-Line fence and love it. I also put in a router table eventually as well. If you want more info and pics let me know

-- You cannot build a reputation on what you are going to do. - Henry Ford

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase