LumberJocks

How much would you pay for this Delta Unisaw & Planer?

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by pmcustom posted 08-19-2013 08:33 PM 1277 views 0 times favorited 5 replies Add to Favorites Watch
View pmcustom's profile

pmcustom

37 posts in 2466 days


08-19-2013 08:33 PM

Topic tags/keywords: planer table saw unisaw delta rockwell auction 18

I am trying to put a value on a couple stationary tools I found at an auction. The table saw is a Delta Unisaw with a 2hp 3ph motor. The planer is a Delta 18” wedgebed planer with a 3hp 3ph motor. Both tools have been sitting for a while and have heavy surface rust but (hopefully) no pitting. Both tools are complete, but I had to partially disassemble them for transport and cleaning. Any idea what these tools are worth?




5 replies so far

View apbeachy's profile

apbeachy

20 posts in 1944 days


#1 posted 08-19-2013 08:44 PM

I will give you $200.38 cash and a smoker (Below) for the uni saw if you drop it off at my house!

View mbs's profile

mbs

1615 posts in 2606 days


#2 posted 08-19-2013 08:59 PM

Most LJ’s don’t have 3 ph available at their homes. I saw a planer similar to that one that was fairly clean in a retail store today and they were asking more than $2K but they are considered a very high priced store. I would guess the planer would go for $1000 if it was cleaned up. probably $300 on the unisaw. Just my guess.

-- Sorry the reply is so long. I didn't have time to write a short reply.

View toolie's profile

toolie

2061 posts in 2295 days


#3 posted 08-20-2013 01:04 AM

good guess on the unisaw, although $400-500 has been paid for similar saws w/ 3 phase motors. no idea on the planer, but 3 phase tools trade for 30-50% less than similar single phase tools, at least in my market.

-- there's a solution to every problem.......you just have to be willing to find it.

View Loren's profile (online now)

Loren

8827 posts in 3314 days


#4 posted 08-20-2013 01:35 AM

$800 for the pair. That’s what I’d pay if I wanted them.

View Biff's profile

Biff

126 posts in 1680 days


#5 posted 08-20-2013 01:39 AM

Around here, no more than $400 -$500 for the pair. Unisaws are fairly common. 3PH motors make these things basta** stepchildren. You will have a lot of money wrapped up in refurbishing and new motors on both pieces.

-- Interested in Oregon property? Visit me at http://www.willamettepropertiesgroup.com

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com