LumberJocks

FS:Tormek T7-Level, Disston Tenon Saw, Stanley No.55 shave, Pecan Mallet, Shinto Rasp, More tools

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by ChristianCastillo posted 362 days ago 951 views 0 times favorited 5 replies Add to Favorites Watch
View ChristianCastillo's profile

ChristianCastillo

27 posts in 881 days


362 days ago

Hi,

First for sale is my Tormek Supergrind 2000 with all the upgrades to T7 standard. The Tormek itself is in beautiful condition with 100% of its paint. The wheel diameter is 245mm of the original 250mm which means the wheel only has 2% of wear. This unit is the 2006 Supergrind 2000 before the release of the T7 model so it incorporates most of the upgrades of the T7 such as:

- Universal Tool Rest with micro-adjust
- Stainless steel wheel shaft and retention hardware ( Important, the unit wont suffer from rust at all )

The upgrades to get it to the same as a T7 are:

- AWT-250 Advanced water trough with enlarged lip/magnet and water chute. ( Water chute part has a ton of little pock marks, just cosmetic.)
- Square Edge Jig SE-76
- AngleMaster WM-200
- Truing Tool TT-50

And the standard accessories:

- Stone Grader SP-650
- Honing Compound PA-70

This unit is quite literally a T7, with a cosmetic condition that is like new and with a wheel that only has 98% wear. This unit will serve someone well looking to save money over buying a new T7 along with paying taxes on the MSRP.

500$ plus shipping.

IMG_2723

IMG_2724

Next for sale is a 14” Disston Keystone Tenon saw, 13ppi X-cut that has been restored cosmetically. The plate is arrow straight with some pitting on one side, but only one very small spot of pitting touches a tooth near the handle. The plate has been polished and shined, the brass hardware has been buffed out with tripoli compound and the handle itself has 100% of its original finish but was cleaned anyways with some orange oil. The saw has all of its teeth present and just needs to be sharpened. This is a great easy to tune saw.

45$ plus shipping.

IMG_2713

IMG_2714

IMG_2715

Next for sale is a Stanley No. 55 concave spokeshave in very nice condition. The spokeshave has 90% of its japanning and the blade is in nice shape as well. This spoke shave isn’t rusty at all and just needs some cleaning. The shave has one very small chip on the bed of the mouth, its minor enough to be filed off if it bothers you.

30$ plus shipping.

IMG_2716

IMG_2717

18-20oz Spalted Pecan Mallet, the mallet has struck a chisel about 5 times and that’s it. It was made by a member here and he did a great job.

30$ plus shipping.

IMG_2606

IMG_2607

Shinto Double Sided Saw Rasp, used but not abused, the rasp is in very nice condition and comes complete with its protective case. The teeth have been cleaned after use and are in very nice shape. This rasp can hog off wood quickly and leave a very nice surface quality for the speed at which it works at. The ball knob has some scratches on it, but everything else is in near perfect shape.

15$ plus shipping.

IMG_2718

IMG_2719

W. Butcher 2 1/2” Plane blade and chip breaker. This plane blade appears to be full length and is in good shape given its age. The blade and C/B are stamped W. Butcher and this combo will make a great set for someone looking to make a jointer plane. W. Butcher is definitely one of the best of the vintage sheffield edge tool makers.

25$ plus shipping.

IMG_2722

Shinwa Handy inkline Jr., used to make a handful of lines only, I filled the cotton reservoir with ink from the tsuboman ink bottle, so that bottle has only been used to fill the inkline. The inkline comes complete with its original packaging and instructions, which explain how to use the inkline as well as its secondary function of a plumb bob. The inkline comes with two bamboo sumisashi as well, one lightly used, the other brand new.

30$ plus shipping.

IMG_2651


5 replies so far

View ChristianCastillo's profile

ChristianCastillo

27 posts in 881 days


#1 posted 361 days ago

The Shinto Rasp and Pecan Mallet are SOLD!

Tormek now 485$ plus shipping.

The Disston Tenon Saw is now 35$ plus shipping.
Stanley No. 55 Shave is now 28$ plus shipping.
W. Butcher Plane Blade is now 20$ plus shipping.
Shinwa Inkline combo deal is now 25$ plus shipping.

View rfusca's profile

rfusca

155 posts in 444 days


#2 posted 361 days ago

If, by some miracle, the Disston is still around by Friday Aug 9th, I’ll snatch it up then.

-- Chris S., North Atlanta, GA - woodworker,DBA, cook, photographer

View ChristianCastillo's profile

ChristianCastillo

27 posts in 881 days


#3 posted 360 days ago

The Tormek has SOLD!

The Disston Tenon Saw is now 35$ plus shipping.

Stanley No. 55 Shave is now SOLD!

W. Butcher Plane Blade is 18$ plus shipping.

Shinwa Inkline combo deal is now 23$ plus shipping.

View ChristianCastillo's profile

ChristianCastillo

27 posts in 881 days


#4 posted 358 days ago

Ok, lets get the last of this sold:

Disston Tenon Saw is now 30$ plus shipping.

W. Butcher Plane Blade is now 15$ plus shipping ( Really good vintage steel).

Shinwa Inkline Combo pack is now 20$ plus shipping.

View ChristianCastillo's profile

ChristianCastillo

27 posts in 881 days


#5 posted 357 days ago

The Disston saw has sold!

W. Butcher Plane Blade is now 15$ plus shipping ( Really good vintage steel).

Shinwa Inkline Combo pack is now 20$ plus shipping.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase