LumberJocks

Oscillating Spindle Sander Question

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by SkinsKaos posted 263 days ago 528 views 0 times favorited 6 replies Add to Favorites Watch
View SkinsKaos's profile

SkinsKaos

9 posts in 426 days


263 days ago

I was gifted a Craftsman Oscillating Spindle Sander today, It’s a 1/2hp Model 113.

Unfortunately it’s missing the 3/4”, 1”, 1.5”, and 3” hard rubber spindles. After looking around I have found that there are no parts available for this particular model.

Does anyone know if there are spindles that will work with this sander? Or if there is some sort of work around?

Thanks!


6 replies so far

View Bogeyguy's profile

Bogeyguy

416 posts in 566 days


#1 posted 263 days ago

If I was you, I would regift it. Just kidding. I would begin by researching who manufactured the unit for Craftsmen and go from there.

-- Art, Pittsburgh.

View Sandra's profile

Sandra

3495 posts in 573 days


#2 posted 263 days ago

Just wondering out loud if the Ridgid ones would fit. It would be easier to find those. When the ridgid one goes on sale at HD it’s a decent price. May be worth keeping the craftsman parts and buying a Ridgid. Love mine.

-- No, I don't want to buy the pink hammer.

View Bill White's profile

Bill White

3183 posts in 2459 days


#3 posted 263 days ago

Show us the first 3 numbers on the model number plate. If it is 113, it was made by Emerson-same maker of the Ridgid stuff (I think).
Bill

-- bill@magraphics.us

View a1Jim's profile

a1Jim

109181 posts in 2075 days


#4 posted 263 days ago

Take a look on Ebay

-- http://artisticwoodstudio.com Custom furniture

View Fred Hargis's profile

Fred Hargis

1474 posts in 991 days


#5 posted 263 days ago

I think that’s the one I have, and you left off a few digits on the model number. Mine is 113.225906. The spindles will be hard to find, adn I do think the Rigid ones will fit. You can always take them back if not. But I bought some Ryobi drums at HD and they worked on mine.

-- I long for the days when Coke was a cola, and a joint was a bad place to be (Merle Haggard)

View Mark Shymanski's profile

Mark Shymanski

4745 posts in 2211 days


#6 posted 243 days ago

How are the drums mounted? Lee Valley had drums that would work in a drill press using a standard Jacob’s chuck. I have a set and they’ve been pretty useful.

Edit:

This link may help
http://www.leevalley.com/en/wood/page.aspx?p=20196&cat=1,42500,42501

-- "Checking for square? What madness is this! The cabinet is square because I will it to be so!" Jeremy Greiner LJ Topic#20953 2011 Feb 2

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase