Vintage Craftsman

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by phlyers posted 07-10-2013 08:46 AM 642 views 0 times favorited 1 reply Add to Favorites Watch
View phlyers's profile


93 posts in 1993 days

07-10-2013 08:46 AM

Hey guys. New here and received some welcomes so thank you for the welcome! I have an older craftsman TS. It’s model number 113.29920 if this helps. Hopefully someone is familiar with this one so here’s my question. To align the blade to the mitre slot do I loosen the table bolts and shift into position or does the trunion get adjusted for this alignment when the blade is in the 90 degree position.

1 reply so far

View toolie's profile


2148 posts in 2834 days

#1 posted 07-10-2013 10:27 AM

assuming it’s an emerson built 10” CI TS, the trunion gets adjusted when the blade is in the 90 degree position. follow the procedure in this OM. should work just fine:

-- there's a solution to every just have to be willing to find it.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics