LumberJocks

JET JTS 10JF splitter

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by skyboy_psu posted 06-24-2013 07:03 PM 1910 views 0 times favorited 3 replies Add to Favorites Watch
View skyboy_psu's profile

skyboy_psu

21 posts in 1883 days


06-24-2013 07:03 PM

Hello All,

I recently purchased a new to me JET JTS10JF table saw. It’s awesome, older, blue, heavy, powerful, and I love it. I spent many hours getting all the rust off the top, cleaning and lubricating it, setting the stops, leveling the wings, adding a better dust collection system, etc. I’d like to install the splitter, but the previous owner didn’t include it.

I think I can fabricate one out of a piece of steel I have laying around, but I’d like to get some dimensions if someone could measure theirs. The part number that I have is 10103038. The picture from the manual indicates it attaches both to the back of the saw by the motor, wraps around over the table, and attaches again through the throat plate and behind the blade. I’d like to know when the blade is fully raised how much space there is between the blade and the splitter, how tall the splitter is above the table, and the distance between the bolt holes.


3 replies so far

View JayT's profile

JayT

5439 posts in 2024 days


#1 posted 06-24-2013 07:08 PM

Before fabbing a splitter, you might check out the BORK riving knife and see if one will fit your saw. This would give you a true riving knife instead of just a splitter.

-- In matters of style, swim with the current; in matters of principle, stand like a rock. Thomas Jefferson

View toolie's profile

toolie

2094 posts in 2441 days


#2 posted 06-24-2013 10:08 PM

what table saw? i don’t see no table aw. no pics, didn’t happen. and why not just buy the part from jet and be done with it?

-- there's a solution to every problem.......you just have to be willing to find it.

View Randy131's profile

Randy131

9 posts in 312 days


#3 posted 02-17-2017 01:16 AM

I to have this same saw Jet JTS-10JF bought new in 1994. I need a new shaft that the blade is mounted on as the keyway is worn beyond repair and 2 new bearings as long as I am removing the shaft. They seem to be discontinued parts.
Anyone have any ideas ? I am finding nothing on the internet searches :(
Thank you,
Randy 131

-- Randy131

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com